Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Imprimir: 2150-766X
ISSN On-line: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2011001444
pages 533-548

CHARACTERIZATION OF NOZZLE EROSION BEHAVIOR UNDER ROCKET MOTOR OPERATING CONDITIONS

Brian Evans
Pennsylvania State University, University Park, Pennsylvania 16802, USA
Kenneth K. Kuo
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802, USA
Andrew C. Cortopassi
The Pennsylvania State University, University Park, Pennsylvania, USA; The Aerospace Corporation, El Segundo, California, USA

RESUMO

The performance deterioration of solid-rocket motors caused by nozzle throat erosion becomes more severe with increased operating pressure from higher rates of heat and mass transfer from the core flow to the nozzle surface. Understanding of the rocket nozzle throat erosion processes and developing methods for mitigation of erosion rate can allow motor operation pressures to be substantially higher than those of the existing propulsion systems. Two test rigs have been utilized in the study of nozzle throat erosion phenomena for G-90 grade graphite: an instrumented solid propellant motor (ISPM) and a solid-propellant rocket motor simulator (RMS). The X-ray translucent nozzle assembly used for the RMS and ISPM allows the real-time imaging of the nozzle throat station. It also has a feature for incorporating a nozzle boundary-layer control system to mitigate nozzle throat erosion rates. The RMS is a gaseous reactant combustor, which allows for control of product species compositions, their flow rates, and combustor operating pressure. The erosion process of G-90 graphite was also evaluated in the ISPM using both non-metallized and metallized composite solid propellants at nominal chamber pressures up to 26 MPa. A dimensionless nozzle throat erosion rate correlation in terms of the effective oxidizer mass fraction, chamber pressure, Reynolds number, and nozzle radius of curvature was developed for non-metallized propellant and RMS motor tests. The calculated erosion rates from the correlation showed agreement within ± 0.05 mm/s of the experimentally determined values. A separate correlation for nozzle erosion rates under metallized propellant heating was also developed. This correlation showed diffusion-limited behavior, since the oxidizer concentration effect is not important.


Articles with similar content:

NOZZLE EROSION CHARACTERIZATION IN A NON-METALLIZED SOLID-PROPELLANT ROCKET MOTOR SIMULATOR
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 3
Jeffrey D. Moore, Brian Evans, Patrick Kutzler, Eric Boyd, Peter J. Ferrara
SURFACE HEAT RELEASE OF HTPB-BASED FUELS IN OXYGEN RICH ENVIRONMENTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
H. Stephen Jones, Grant A. Risha, George C. Harting, Joseph P. Arves, Arie Peretz, Donald E. Koch
COMBUSTION OF PTFE-BORON COMPOSITIONS FOR PROPULSION APPLICATIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 5
Grant A. Risha, Chad A. Stoltz, Vasant S. Joshi, Terrence L. Connell, Jr., Reed H. Johansson, Gregory Young, Brian P. Mason, Richard A. Yetter
GLYCIDYL AZIDE POLYMER AND POLYETHYLENE GLYCOL MIXTURES AS HYBRID ROCKET FUELS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Koji Fujisato, Yuya Nomura, Motoyasu Kimura, Takeshi Yagishita, Makihito Nishioka, Keiichi Hori, Yutaka Wada
INVESTIGATION OF SOLID OXIDIZER AND GASEOUS FUEL COMBUSTION PERFORMANCE USING AN ELEVATED PRESSURE COUNTERFLOW EXPERIMENT FOR REVERSE HYBRID ROCKET ENGINE
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 6
Grant A. Risha, Terrence L. Connell, Jr., Reed H. Johansson, Gregory Young, Richard A. Yetter