Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Heat Transfer Research
Fator do impacto: 1.199 FI de cinco anos: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN Imprimir: 1064-2285
ISSN On-line: 2162-6561

Volumes:
Volume 51, 2020 Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2020033039
pages 1073-1085

EXPERIMENTAL INVESTIGATION ON THERMAL PERFORMANCE OF THERMOSYPHON HEAT PIPE USING DOLOMITE/DEIONIZED WATER NANOFLUID DEPENDING ON NANOPARTICLE CONCENTRATION AND SURFACTANT TYPE

Duygu Yılmaz Aydın
Engineering Faculty, Chemical Engineering Department, Gazi University, Ankara, Turkey
Metin Gürü
Engineering Faculty, Chemical Engineering Department, Gazi University, Ankara, Turkey
Adnan Sözen
Gazi University, Faculty of Technology, Department of Energy System Engineering, Ankara, Turkey

RESUMO

The conventional fluids used for heat transfer cannot provide the desired thermal performance due to their poor heat transfer characteristics. Disadvantages of the base fluids can be overcome by forming a suspension of nanoparticles with the base fluid. In this work, the effects of using dolomite/deionized water nanofluid on the thermal performance of thermosyphon heat pipe were experimentally investigated. Nanoparticle concentration and surfactant type (sodium dodecyl benzene sulfonate (SDBS), Triton X-100) were studied as parameters. Three different cooling water mass flow rates (5, 7.5, and 10 g/s) were used in experiments with different heating powers (200, 300, and 400 W) to test heat pipe performance. The results indicated that nanoparticle concentration is an effective parameter in the performance of nanofluids, and SDBS exhibit more favorable characteristics than Triton X-100 as a surfactant. The 36.84% decrease in thermal resistance was observed compared to deionized water and enhancement of 38.75% was achieved in heat pipe efficiency using of dolomite nanofluid containing 2% of dolomite nanoparticle and 0.5% of SDBS under a heating power of 200 W and cooling water mass flow rate of 5 g/s.

Referências

  1. Aparna, Z., Ghosh, S., and Pabi, S.K., Influence of Container Material on the Heat Transfer Characteristics of Nanofluids, Exp. Heat Transf., vol. 30, pp. 302-315, 2017.

  2. Babita, Sharma, S.K., and Gupta, S.M., Preparation and Evaluation of Stable Nanofluids for Heat Transfer Application: A Review, Exp. Therm. Fluid Sci., vol. 79, pp. 202-212, 2016.

  3. Buschmann, M.H., Nanofluids in Thermosyphons and Heat Pipes: Overview of Recent Experiments and Modeling Approaches, Int. J. Therm. Sci, vol. 72, pp. 1-17, 2014.

  4. Chopkar, M., Sudarshan, S., Das, P.K., and Manna I., Effect of Particle Size on Thermal Conductivity of Nanofluid, Metall. Mater. Trans. A, vol. 39, pp. 1535-1542, 2008.

  5. Ganvir, R.B., Walke, P.V., and Kriplani, V.M., Heat Transfer Characteristics in Nanofluid-A Review, Renew. Sustain. Energy Rev, vol. 75, pp. 451-460, 2017.

  6. Gupta, M., Singh, V., Kumar, R., and Said, Z., A Review on Thermophysical Properties of Nanofluids and Heat Transfer Applications, Renew. Sustain. Energy Rev., vol. 74, pp. 638-670, 2017.

  7. Gupta, N.K., Tiwar, A.K., and Ghosh, S.K., Heat Transfer Mechanisms in Heat Pipes Using Nanofluids-A Review, Exp. Therm. Fluid Sci, vol. 90, pp. 84-100, 2018.

  8. Guru, M., Sozen, A., Karakaya, U., and Qiftfi, E., Influences of Bentonite-Deionized Water Nanofluid Utilization at Different Concentrations on Heat Pipe Performance: An Experimental Study, Appl. Therm. Eng., vol. 148, pp. 632-640, 2019.

  9. Huminic, G. and Huminic, A., Heat Transfer Characteristics of a Two-Phase Closed Thermosyphons Using Nanofluids, Exp. Therm. Fluid Sci., vol. 35, no. 3, pp. 550-557, 2011.

  10. Huminic, G., Huminic, A., Morjan, I., and Dumitrache, F., Experimental Study of the Thermal Performance of Thermosyphon Heat Pipe Using Iron Oxide Nanoparticles, Int. J. Heat Mass Transf., vol. 54, pp. 656-661, 2011.

  11. Ilhan, B., Kurt, M., and Erturk, H., Experimental Investigation of Heat Transfer Enhancement and Viscosity Change of hBN Nanofluids, Exp. Therm. Fluid Sci., vol. 77, pp. 272-283, 2016.

  12. Kamyar, A., Ong, K., and Saidur, S.R., Effects of Nanofluids on Heat Transfer Characteristics of a Two-Phase Closed Thermosyphon, Int. J. Heat Mass Transf., vol. 65 pp. 610-618, 2013.

  13. Khanlari, A., Aydin, D.Y., Sozen, A., and Variyenli H.I., Investigation of the Influences of Kaolin-Deionized Water Nanofluid on the Thermal Behavior of Concentric Type Heat Exchanger, Heat Mass Transf, 2019. DOI: 10.1007/s00231-019-02764-1.

  14. Kim, S.H., Choi, S.R., and Kim, R., Thermal Conductivity of Metal-Oxide Nanofluids: Particle Size Dependence and Effect of Laser Irradiation, J. Heat Transf., vol. 129, no. 3, pp. 298-307, 2007.

  15. Maheshwary, P.B., Handa, C.C., and Nemade, K.R., A Comprehensive Study of Effect of Concentration, Particle Size and Particle Shape on Thermal Conductivity of Titania/Water Based Nanofluid, Appl. Therm. Eng., vol. 119, pp. 79-88, 2017.

  16. Noie, S.H., Heris, S.Z., Kahani, M., and Nowee, S.M., Heat Transfer Enhancement Using Al2O3/Water Nanofluid in a Two-Phase Closed Thermosyphon, Int. J. Heat Fluid Flow, vol. 30, pp. 700-705, 2009.

  17. Ozsoy, A. and Qorumlu, V., Thermal Performance of a Thermosyphon Heat Pipe Evacuated Tube Solar Collector Using Silver-Water Nanofluid for Commercial Applications, Renew. Energy, vol. 122, pp. 26-34, 2018.

  18. Pryazhnikov, M.I., Minakov, A.V., Rudyak, V.Ya., and Guzei, D.V., Thermal Conductivity Measurements of Nanofluids, Int. J. Heat Mass Transf., vol. 104, pp. 1275-1282, 2017.

  19. Saleh, R., Putra, N., Prakoso, S.P., and Septiadi, W.N., Experimental Investigation of Thermal Conductivity and Heat Pipe Thermal Performance of ZnO Nanofluids, Int. J. Therm. Sci., vol. 63, pp. 125-132, 2013.

  20. Sarafraz, M.M. and Hormozi, F., Experimental Study on the Thermal Performance and Efficiency of a Copper Made Thermosyphon Heat Pipe Charged with Alumina-Glycol Based Nanofluids, Powder Technol., vol. 266, pp. 378-387, 2014.

  21. Sarafraz, M.M., Hormozi, F., and Peyghambarzadeh, S.M., Thermal Performance and Efficiency of a Thermosyphon Heat Pipe Working with a Biologically Ecofriendly Nanofluid, Int. Commun. Heat Mass Transf., vol. 57, pp. 297-303, 2014.

  22. She, L. and Fan, G., Numerical Simulation of Flow and Heat Transfer Characteristics of CuO-Water Nanofluids in a Flat Tube, Front. Energy Res., vol. 6, p. 57, 2018.

  23. Sozen, A., Guru, M., Khanlari, A., and Qiftfi, E., Experimental and Numerical Study on Enhancement of Heat Transfer Characteristics of a Heat Pipe Utilizing Aqueous Clinoptilolite Nanofluid, Appl. Therm. Eng., vol. 160, p. 114001, 2019.

  24. Sozen, A., Guru, M., Menlik, T., Karakaya, U., and Ciftfi, E., Experimental Comparison of Triton X-100 and Sodium Dodecyl Benzene Sulfonate Surfactants on Thermal Performance of TiO2 Deionized Water Nanofluid in a Thermosiphon, Exp. Heat Transf., vol. 3, no. 5, pp. 450-469, 2018.

  25. Sozen, A., Menlik, T., Aktas, M., and Guru, M., Utilization of Blast Furnace Slag Nano-Fluids in Two-Phase Closed Thermo-Syphon Heat Pipes for Enhancing Heat Transfer, Exp. Heat Transf., vol. 30, no. 2, pp. 112-125, 2017.

  26. Sozen, A., Menlik, T., Guru, M., Boran, K., Kilif, F., Aktas, M., and Cakir, M.T., A Comparative Investigation on the Effect of Fly-Ash and Alumina Nanofluids on the Thermal Performance of Two-Phase Closed Thermo-Syphon Heat Pipes, Appl. Therm. Eng., vol. 96, pp. 330-337, 2016.

  27. Suganthi, K.S. and Rajan, K.S., Metal Oxide Nanofluids: Review of Formulation, Thermo-Physical Properties, Mechanisms and Heat Transfer Performance, Renew. Sustain. Energy Rev., vol. 76, pp. 226-255, 2017.

  28. Suganthi, K.S., Vinodhan, V.L., and Rajan, K.S., Heat Transfer Performance and Transport Properties of ZnO-Ethylene Glycol and ZnO-Ethylene Glycol-Water Nanofluid Coolants, Appl. Energy, vol. 135, pp. 548-559, 2014.

  29. Sundar, L.S., Farooky, M.H., Sarada, S.N., and Singh, M.K., Experimental Thermal Conductivity of Ethylene Glycol and Water Mixture Based Low Volume Concentration of Al2O3 and CuO Nanofluids, Int. Commun. Heat Mass Transf., vol. 41, pp. 41-46, 2013.

  30. Yang, L., Du, K., Zhang, X.S., and Cheng, B., Preparation and Stability of Al2O3 Nanoparticle Suspension of Ammonia-Water Solution, Appl. Therm. Eng., vol. 31, pp. 3643-3647, 2011.


Articles with similar content:

USAGE OF A DIATOMITE-CONTAINING NANOFLUID AS THE WORKING FLUID IN A WICKLESS LOOP HEAT PIPE: EXPERIMENTAL AND NUMERICAL STUDY
Heat Transfer Research, Vol.49, 2018, issue 17
Ugur Karakaya, Halil Ibrahim Variyenli, Metin Gürü, Erdem Çiftçi, Adnan Sözen, Selçuk Keçel
HEAT TRANSFER AND FLUID FLOW STUDY OF CuO-W/EG(50:50) NANOFLUIDS THROUGH ALUMINIUM MICROCHANNELS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Dasaroju Gangacharyulu, Harkirat Sandhu
EXPERIMENTAL INVESTIGATIONS ON THE COOLING PERFORMANCE OF MICROCHANNELS USING ALUMINA NANOFLUIDS WITH DIFFERENT BASE FLUIDS
Journal of Enhanced Heat Transfer, Vol.25, 2018, issue 3
Dasaroju Gangacharyulu, Harkirat Sandhu, Mani Kanwar Singh
Investigation on the heat transfer performance of BeO-water nanofluid in an electronic cooling system
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Vol.0, 2019, issue
Bindusai Morri, Vishnuprasad Selvaraj, Karthick Senthilkumar, Haribabu Krishnan
GOLD-IN-WATER NANOFLUIDS IN MICROCHANNELS: SURFACTANT EFFECT
International Heat Transfer Conference 16, Vol.19, 2018, issue
Haluk Kulah, Eylül Simsek, Aziz Koyuncuoglu, Matthew Redmond, Tuba Okutucu-Özyurt