Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Heat Transfer Research
Fator do impacto: 0.404 FI de cinco anos: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN On-line: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2013006087
pages 473-482

NUMERICAL SIMULATION OF THE AIR FLOW FIELD IN THE MELT BLOWING PROCESS WITH THE USE OF AN AUXILIARY NOZZLE

Yuanling Cheng
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Lili Wu
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Ting Chen
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China

RESUMO

The melt blowing process can produce ultrafine fibers. Adding an auxiliary nozzle is helpful to further decrease the fiber diameter. The air flow field of the melt blowing process with the use of an auxiliary nozzle is simulated numerically. The simulation results are compared with analytical calculation results and experimental data. The results provide a good foundation for modeling the polymer drawing in our further researches on improving the melt blowing technology.


Articles with similar content:

EFFECT OF OSCILLATING AIR JETS ON POLYMER DRAWING IN THE MELT BLOWING PROCESS
Heat Transfer Research, Vol.44, 2013, issue 5
Ting Chen, Lili Wu
A NUMERICAL SIMULATION OF THE RESIN TRANSFER MOLDING WITH VARIABLE THICKNESS OF REINFORCEMENT
Journal of Porous Media, Vol.14, 2011, issue 9
Jamal Echaabi, Jamal Samir, Mohamed Hattabi
ANALYSIS OF THE PERFORMANCE OF A NOVEL HEAT TRANSFER SURFACE USED IN AN INDUSTRIAL HEAT RECOVERY PROCESS
International Journal of Energy for a Clean Environment, Vol.16, 2015, issue 1-4
Wenjing Du, Peili Wang, Lin Cheng
EXPERIMENTAL STUDIES AND NUMERICAL SIMULATION OF TWO-DIMENSIONAL ALUMINUM METAL FOAMING PROCESS UNDER EXTERNAL FIELD BEFORE SOLIDIFICATION
Journal of Porous Media, Vol.22, 2019, issue 2
Mouhamadou A. Diop, Mario Fafard, Hao Hai
NUMERICAL ANALYSIS OF HEAT CONDUCTION TREATED WITH HIGHLY CONDUCTIVE COPPER OXIDE NANOPARTICLES IN POROUS MEDIA
Special Topics & Reviews in Porous Media: An International Journal, Vol.7, 2016, issue 2
Arash Rabbani, Mohammad-Reza Rokhforouz, Shahab Ayatollahi, Vahid Taghikhani