Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Heat Transfer Research
Fator do impacto: 0.404 FI de cinco anos: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN On-line: 2162-6561

Volumes:
Volume 51, 2020 Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018026458
pages 89-105

THERMOHYDRAULIC CHARACTERISTICS OF MICROCHANNEL HEAT SINKS COMBINED WITH RIBS AND CAVITIES: EFFECTS OF GEOMETRIC PARAMETERS AND HEAT FLUX

Cong Li
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
Hong-Ju Guo
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
Wei-Biao Ye
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
Yuxiang Hong
Department of Chemistry and Chemical Engineering, Lishui University, Lishui 323000, People's Republic of China
Si-Min Huang
Key Laboratory of Distributed Energy Systems of Guangdong Province, Department of Energy and Chemical Engineering, Dongguan University of Technology, Dongguan 523808, People's Republic of China

RESUMO

The effects of the geometric parameters and heat flux on the thermohydraulic characteristics of microchannel heat sinks combined with ribs and cavities are investigated numerically. The numerical study is performed under conditions of laminar flow with conjugate heat transfer between silicon and water. In order to find the optimum substrate thickness, ratios of substrate thickness to microchannel height (Hs/Hc = 0, 0.25, 0.50, 0.75, 1.00, 1.25, and 1.50) are investigated. It is found that the temperature of the substrate surface firstly decreases and then gradually increases, the minimum temperature of the substrate surface occurs with Hs/Hc = 0.25. Furthermore, the microchannel heat sinks are studied at rib width to the spacing ratios (Lr/Sr = 0.25, 0.50, 0.75, and 1.0), rib heights to parallel sidewalls width ratios (Hr/Wc = 0.10, 0.15, 0.20, and 0.25), spacing to the parallel sidewalls width ratios (Sr/Wc = 4, 8, 12, and 16) and heat fluxes (qw = 50, 100, 150, 200, 250, and 300 W cm–2). The results show that the Performance Evaluation Criterion (PEC) is continued to slowly decrease with increase of qw. For all cases of qw, the maximum value of PEC occurs in model 2 with Lr/Sr = 0.50, Hr/Wc = 0.20, and Sr/Wc = 4. For Re > 320, the wall temperature of model 1 is slightly smaller than that of model 2.


Articles with similar content:

ENHANCEMENT OF FLOW-JET COMBINED BOILING HEAT TRANSFER OF FC-72 OVER MICRO-PIN-FINNED SURFACES
Journal of Enhanced Heat Transfer, Vol.19, 2012, issue 6
Yonghai Zhang, Dong Guo, Jin-Jia Wei
EXPERIMENTAL STUDY OF HEAT TRANSFER CONTROL AROUND AN OBSTACLE BY USING A RIB
Heat Transfer Research, Vol.47, 2016, issue 8
Bengt Sunden, Zahra Ghorbani-Tari
A NUMERICAL STUDY OF NANOFLUID FORCED CONVECTION IN A POROUS CHANNEL WITH DISCRETE HEAT SOURCES
Journal of Porous Media, Vol.17, 2014, issue 6
Payam Rahim Mashaei, Seyed Mostafa Hosseinalipour
LAMINAR FREE CONVECTION BETWEEN TWO VERTICAL PARALLEL PLATES WITH DIFFERENT RIB HEIGHTS AND POSITIONS
International Heat Transfer Conference 16, Vol.9, 2018, issue
Viktor I. Terekhov, Khalil F. Yassin, Ali L. Ekaid
DIRECT NUMERICAL SIMULATIONS OF TURBULENT BOUNDARY LAYERS OVER SQUARE-EDGED 2-D AND 3-D ROUGH WALLS
TSFP DIGITAL LIBRARY ONLINE, Vol.7, 2011, issue
Jae Hwa Lee, Hyung Jin Sung