Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Journal of Enhanced Heat Transfer
Fator do impacto: 0.562 FI de cinco anos: 0.605 SJR: 0.211 SNIP: 0.361 CiteScore™: 0.33

ISSN Imprimir: 1065-5131
ISSN On-line: 1026-5511

Volumes:
Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2013006564
pages 43-58

AIRSIDE PERFORMANCE OF FIN-AND-TUBE HEAT EXCHANGERS HAVING SINE WAVE OR SINE WAVE-SLIT FINS

Nae-Hyun Kim
Department of Mechanical Engineering, Incheon National University, 12-1 Songdo-Dong, Yeonsu-Gu Inchon, 22012, Korea
Baek Youn
Air Conditioner and Refrigerator Division, Samsung Electronics Co., Suwon, Korea

RESUMO

The heat transfer and friction characteristics of heat exchangers having sine wave or sine wave-slit fins were experimentally investigated. Thirty-eight samples having different waffle heights (1.5 and 2.0 mm), fin pitches (1.3 to 1.7 mm), and tube rows (one to three) were tested. Results show that the sine wave-slit geometry provided 20% higher heat transfer coefficients and 44% higher friction factors than the sine wave geometry. The j/f ratios of the sine wave geometry, however, were higher than those of the sine wave-slit geometry. Within the present geometric variations, the effect of waffle height on the heat transfer coefficient was not prominent. The effect of fin pitch on j and f factor was also negligible for sine wave fin. For sine wave-slit fin, however, both j and f factors increased as fin pitch decreased. New correlations were developed based on the present data.


Articles with similar content:

Experimental Determination of Heat Transfer and Friction Correlations for Plate Fin-and-Tube Heat Exchangers
Journal of Enhanced Heat Transfer, Vol.11, 2004, issue 3
Dawid Taler
COMPUTATIONAL INVESTIGATION AND OPTIMIZATION OF HEAT TRANSFER ENHANCEMENT THROUGH PERFORATED PIN FINS OF DIFFERENT DIMENSIONS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Promod Kumar Patowari, Ambarish Maji, Dipankar Bhanja
PRESSURE DROP CHARACTERISTICS OF CIRCUIT BOARD WITH ARRAYS OF LSI PACKAGES
Transport Phenomena in Thermal Engineering. Volume 2, Vol.0, 1993, issue
Hitoshi Matsushima, Takehiko Yanagida, Wataru Nakayama
Local Optimum Channel Height for Pressure Drop and Heat Transfer in the Herringbone Wavy Channel
4th Thermal and Fluids Engineering Conference, Vol.4, 2019, issue
Hie-Chan Kang, Young Hyun Kang
Some Aspects of Plate Fin-and-Tube Heat Exchangers: With and Without Louvers
Journal of Enhanced Heat Transfer, Vol.6, 1999, issue 5
Chang-Tsair Chang, Yu-Juei Chang, Chi-Juan Lee, Chi-Chuan Wang