Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Journal of Enhanced Heat Transfer
Fator do impacto: 1.406 FI de cinco anos: 1.075 SJR: 0.287 SNIP: 0.653 CiteScore™: 1.2

ISSN Imprimir: 1065-5131
ISSN On-line: 1026-5511

Volumes:
Volume 27, 2020 Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2018025155
pages 195-210

EFFECT OF AIR BUBBLE INJECTION ON THE OVERALL HEAT TRANSFER COEFFICIENT

Korhan Ökten
Amasya University, Technology Faculty, Mechanical Engineering Department, Amasya, Turkey
Atilla Biyikoglu
Faculty of Engineering, Department of Mechanical Engineering, Gazi University, Maltepe, Ankara, Turkey

RESUMO

Thermal energy storage tanks are widely used in different applications. There are many studies in the literature on increasing the efficiency of thermal storage tanks. Although air bubble injection systems were also used in different types of heat exchanger in the literature, no study has been detected about the effect of air bubble injection on the performance of thermal storage tanks. In this study, an air bubble injection system was integrated into a storage tank and the effect of bubble formation on heat transfer was experimentally examined. Experiments were conducted on the tank with and without air bubble injection. The results of the study showed that the tank with air bubble injection increased the amount of heat removal between the storage fluid and heat removal fluid by 11% and the amount of heat removal between the storage fluid and environment by 14%. The study also showed the overall heat transfer coefficient between the storage fluid and environment increased approximately fivefold and the overall heat transfer coefficient between the storage fluid and heat removal fluid increased approximately twofold.


Articles with similar content:

Effect of gravity and metal foam on melting of phase change material in a vertical shell and tube heat exchanger
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2018, issue
S. Mali, S. Narayanamurthy, Subrata Sengupta
LAMINAR FLOW AND HEAT TRANSFER OF TWO THERMAL EXPANSION FLUID IN PROTRUDED AND PIN-FINNED CHANNELS
Second Thermal and Fluids Engineering Conference, Vol.30, 2017, issue
Ke Yang, Yong Hui Xie, Di Zhang
THE IMPACT OF THE DEPTH OF A ONE-HOLE GEOTHERMAL HEAT EXCHANGER ON ITS CHARACTERISTICS
Advances in Heat Transfer Engineering, Vol.1, 2003, issue
Wladyslaw Nowak, Tomasz Kujawa
NUMERICAL STUDY OF PYROLYSIS GAS FLOW AND HEAT TRANSFER INSIDE AN ABLATOR
Computational Thermal Sciences: An International Journal, Vol.4, 2012, issue 3
Ken-ichi Abe, Sohey Nozawa, H. Kihara, Naoya Hirata, Y. Takahashi
VISUALIZATION AND NUMERICAL SIMULATION OF TWO-PHASE FLOW BETWEEN ELECTRODES ON ALKALINE WATER ELECTROLYSIS
Journal of Flow Visualization and Image Processing, Vol.17, 2010, issue 2
Naoki Nishijiri, Niro Nagai, Tomoaki Ito