Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Journal of Enhanced Heat Transfer
Fator do impacto: 1.406 FI de cinco anos: 1.075 SJR: 0.287 SNIP: 0.653 CiteScore™: 1.2

ISSN Imprimir: 1065-5131
ISSN On-line: 1026-5511

Volumes:
Volume 27, 2020 Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v6.i5.10
pages 327-341

Heat Transfer Enhancement on the Outer Surface of Spirally Indented Tubes

M. M. Salim
The University of Illinois at Chicago, Department of Mechanical Engineering (m/c 251), 842 W. Taylor St., Chicago, IL 60607-7022
D. M. France
The University of Illinois at Chicago, Department of Mechanical Engineering (m/c 251), 842 W. Taylor St., Chicago, IL 60607-7022
C. B. Panchal
Argonne National Laboratory, Argonne, IL, USA; School of Chemical Engineering Oklahoma State University Stillwater, Oklahoma, U.S.A.

RESUMO

Heat transfer enhancement on the outer surface of spirally indented tubes was investigated experimentally. The spirally indented tubes studied were characterized by thin walls with a spiral groove on the outer surface which produced a spiral protrusion of the material on the inner surface. Heat transfer data were obtained from experiments in horizontal spirally indented tubes (inside diameter = 23.8 mm) placed inside of a smooth outer tube forming an annulus. Heated water flowed inside the tubes, and chilled water in the surrounding annulus. A smooth tube and three spirally indented tubes were tested with indentation depth to tube inside diameter ratios of 0.0075, 0.021 and 0.038. The ratio of indentation pitch to inside tube diameter was fixed at 0.9 in all tests producing a ratio of pitch to indentation depth of 23.7 to 120. The annulus flow was turbulent in all tests with the Reynolds number in the range of 7,000 to 115, 300. Heat transfer results for the outside surface of the spirally indented tubes were compared to that of smooth tubes and to that of spirally indented tube inside surfaces. A correlation equation was developed to predict the outer surface heat transfer coefficient of spirally indented tubes over the parameter range of the data.


Articles with similar content:

Enhancement of Heat Transfer Rates by Coiled Wires During Forced Convective Condensation of R-22 Inside Horizontal Tubes
Journal of Enhanced Heat Transfer, Vol.7, 2000, issue 2
M. A. Akhavan-Behabadi, H. K. Varma, K. N. Agarwal
HEAT TRANSFER AND FLUID FLOW OF A GLYCOL-BASED HEAT TRANSFER LIQUID IN A SMOOTH TUBE AND IN A TUBE WITH WIRE COIL INSERT
Energy and the Environment, 1998, Vol.0, 1998, issue
Pertti Sarkomaa, R. Lankinen
FILM CONDENSATION OF STEAM ON HORIZONTAL FINNED TUBES: EFFECT OF FIN SHAPE
International Heat Transfer Conference 8, Vol.4, 1986, issue
A. S. Wanniarachchi , John W. Rose, E. Mltrou, Paul J. Marto
CONDENSATION OF ATMOSPHERIC PRESSURE STEAM ON INTEGRAL-FIN TUBES - EFFECT OF FIN HEIGHT AND VAPOUR VELOCITY
International Heat Transfer Conference 13, Vol.0, 2006, issue
S. Namasivayam
Heat Transfer Characteristics of Falling Film Evaporation on a Horizontal Tube Bundle
International Heat Transfer Conference 12, Vol.50, 2002, issue
Sin-Su Seol, Hyun-Sung Choi, Yang-Gyu Kim