Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Journal of Enhanced Heat Transfer
Fator do impacto: 0.562 FI de cinco anos: 0.605 SJR: 0.175 SNIP: 0.361 CiteScore™: 0.33

ISSN Imprimir: 1065-5131
ISSN On-line: 1026-5511

Volumes:
Volume 27, 2020 Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2012005999
pages 489-503

ENHANCEMENT OF FLOW-JET COMBINED BOILING HEAT TRANSFER OF FC-72 OVER MICRO-PIN-FINNED SURFACES

Yonghai Zhang
School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, P.R. China; Shenzhen Research Institute of Xi'an Jiaotong University, Shenzhen, Guangdong, 518057, P.R. China
Jin-Jia Wei
School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi, 710049, P.R. China; Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong Uniersity, Xi'an, 710049, P.R.China
Dong Guo
YanTai WanHua Group, YanTai, 264000, China

RESUMO

For highly efficient solving of the power dissipation problem of electronic components with high heat flux, experimental study of the flow-jet combined boiling heat transfer on silicon chips was conducted. Micro-pin-fins with dimensions of 30×60 µm2 and 30×120 µm2 (thickness × height) were fabricated on the chip surfaces by the dry etching technique. The experiments were made at three different cross-flow velocities Vc (0.5,1.0, 1.5 m/s) and different jet velocities Vj (0-2 m/s) with two liquid subcooling ΔTsub (25° C and 35° C). A smooth surface was also tested for comparison. The micro-pin-fins showed a considerable heat transfer enhancement due to an increase in effective heat transfer surface area caused by micro-convection around micro-pin-fins. The maximum allowable heat flux qmax is increased and the wall superheat is decreased greatly. For a given Vc, the heat transfer enhancement is more significant as Vj increases, but the qmax increment decreases as Vc increases. The fin efficiency decreases as Vc or/and Vj increases or the heat flux q increases. The maximum qmax can reach 161 W/cm2 at Vc = 1.5 m/s, Vj = 2 m/s, ΔTsub = 35°C for chip PF30-120.


Articles with similar content:

ENHANCED HEAT TRANSFER OF FLOW BOILING COMBINED WITH JET IMPINGEMENT
Interfacial Phenomena and Heat Transfer, Vol.1, 2013, issue 1
Yonghai Zhang, Dong Guo, Jin-Jia Wei, Jian-Fu Zhao
SUBCOOLED BOILING OF DIELECTRIC LIQUIDS ON POROUS GRAPHITE AT DIFFERENT ORIENTATIONS
International Heat Transfer Conference 13, Vol.0, 2006, issue
Jack L. Parker, Mohamed S. El-Genk
Abstract of "SURFACE EFFECTS ON THE POOL BOILING CHF"
ICHMT DIGITAL LIBRARY ONLINE, Vol.1, 2000, issue
Klemen Ferjancic, Iztok Golobic
SURFACE EFFECTS ON THE POOL BOILING CHF
ICHMT DIGITAL LIBRARY ONLINE, Vol.1, 2000, issue
Klemen Ferjancic, Iztok Golobic
SATURATION NUCLEATE BOILING OF PF-5060 ON INCLINED DIMPLED SURFACES
First Thermal and Fluids Engineering Summer Conference, Vol.15, 2015, issue
Arthur Suszko, Mohamed S. El-Genk, Krishna Kota