Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN On-line: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2016017429
pages 197-224

STUDY AND ANALYSIS OF THE MACROSTRUCTURE CHARACTERISTICS IN FCAW WITH THE USE OF A FLAT WIRE ELECTRODE AND BY OPTIMIZING THE PROCESS PARAMETER USING THE TAGUCHI METHOD AND REGRESSION ANALYSIS

sripriyan karuthapandi
PSG College of Technology
Ramu Murugan
Department of Mechanical Engineering, Amrita School of Engineering, Amirta Vishwa Vidyapeetham University, Coimbatore campus - 641112, India
P. K. Palani
Department of Mechanical Engineering, Government College of Technology, Coimbatore - 641013, India

RESUMO

In this paper, an attempt has been made to enhance the macrostructure characteristics such as deposition rate, weld thickness, penetration area, and hardness by using a flat wire electrode and by optimizing the welding parameters. For this, an experimental study has been made. The welding parameters such as the welding current I, welding speed WS, and the orientation of a flat wire electrode θ that influence most the weld bead performance are considered, and the other parameters are held constant. The welding was carried out by using the L9 Taguchi technique. The performances of the weld samples are analyzed, and the macrostructure characteristics are measured. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) are applied to study the effect of welding parameters. The results obtained by using the S/N ratio match closely with ANOVA. It is inferred that the orientation of the flat wire electrode and welding current are most influencing parameters. Multiple regression equations are also formulated for verifying the macrostructure characteristics.


Articles with similar content:

REFINEMENT OF PARAMETERS OF SPECTRUM DOMINANT TONES
TsAGI Science Journal, Vol.50, 2019, issue 3
Mansur Foatovich Garifullin
Investigation of the Effectiveness for Methods of Linear Identification in a Spectral Domain
Journal of Automation and Information Sciences, Vol.31, 1999, issue 12
Andrey A. Romanov
CFD SIMULATIONS AND EXPERIMENTAL VALIDATION FOR GASKETED PLATE HEAT EXCHANGERS
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Cagin Gulenoglu, Selin Aradag, Sadik Kakac, Ece Ozkaya
FORGOTTEN MODEL OF LIGHTNING STROKE
Telecommunications and Radio Engineering, Vol.69, 2010, issue 12
A. P. Nickolaenko
INVESTIGATION OF NANOPOROUS SILICON−BASED ENERGETIC MATERIALS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Alon Gany, Evgenia Golda Fradkin