High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publicou 4 edições por ano
ISSN Imprimir: 1093-3611
ISSN On-line: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Volume 24, 2020 Edição 3
DOI: 10.1615/HighTempMatProc.v24.i3
THIN-FILM TECHNOLOGY FOR CREATING FLEXIBLE SUPERCAPACITOR ELECTRODES BASED ON A CARBON MATRIX
pp. 167-171
DOI: 10.1615/HighTempMatProc.2020035840
NANOSTRUCTURING OF THE POLYETHYLENETEREPHTHALATE SURFACE USING ION-PLASMA TECHNOLOGY WITH THE HELP OF FLUORINE-CONTAINING GAS MIXTURES
pp. 173-182
DOI: 10.1615/HighTempMatProc.2020035843
INTRINSIC GETTERING IN SILICON SUBSTRATE OF MOS STRUCTURES UNDER COMBINED INFLUENCE OF RADIATION AND PULSED MAGNETIC FIELDS
pp. 183-191
DOI: 10.1615/HighTempMatProc.2020035879
FABRICATION OF BINARY SILICON-BASED NANOCRYSTALS BY PLASMA AND LASER-INDUCED CHEMISTRY IN SOLUTION
pp. 201-209
DOI: 10.1615/HighTempMatProc.2020036345
STRUCTURE OF THE AUSTENITIC STEEL SURFACE LAYER SUBJECTED TO COMPRESSION PLASMA FLOWS IMPACT
pp. 211-225
DOI: 10.1615/HighTempMatProc.2020036411
STRUCTURAL-PHASE COMPOSITION OF TiC/Ti COMPOSITES AND POWDERS OBTAINED BY COMBUSTION OF Ti-C GREEN MIXTURES WITH A TITANIUM EXCESS
pp. 227-238
DOI: 10.1615/HighTempMatProc.2020036732
Última edição
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Próximos artigos
Review of some schemes for compact particle and neutron sources under laser emission
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products