Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.137 SNIP: 0.341 CiteScore™: 0.43

ISSN Imprimir: 1093-3611
ISSN On-line: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v11.i4.30
pages 505-513

NEW FEEDING SYSTEM FOR PLASMA REACTOR "PLASMALAB" FOR REDUCTION PROCESSING OF DISPERSE RAW AND WASTE MATERIALS

Mihail K. Mihovsky
“PLASMALAB” - Plasma Metallurgy Research Laboratory, University of Chemical Technology and Metallurgy - Sofia, 8 “Kliment Ohridsky” Blvd., 1156, Sofia, Bulgaria
V. Hadzhiyski
“PLASMALAB” - Plasma Metallurgy Research Laboratory, University of Chemical Technology and Metallurgy - Sofia, 8 “Kliment Ohridsky” Blvd., 1156, Sofia, Bulgaria
L. Todorov
“PLASMALAB” - Plasma Metallurgy Research Laboratory, University of Chemical Technology and Metallurgy - Sofia, 8 “Kliment Ohridsky” Blvd., 1156, Sofia, Bulgaria

RESUMO

The development of the "FFP (Falling Film Plasma) reactor" concept by "PLASMALAB" covers mainly the manner of introduction of raw materials and the organization of the plasma arc. The new plasma torch is a combination between a hollow graphite cathode and a copper water-cooled nozzle. The next special feature of this construction is a bilateral blowing of the two plasma gas streams - through the hollow cathode and through the nozzle. This plasma torch is situated coaxially over a vertical water-cooled cylindrical reactor - anode. The anode and the cathode spots are in a continuous motion with regulated velocity by auto-electro-magnetic rotation (AEMR). The adopted type of charge introduction - through the hollow cathode, ensures maximum convective and radiating heat exchange between the disperse material and the plasma arc. The low bulk density and low fluidity are the main peculiarity of a dispersed metallurgical charge. In this work is presented the constructed "PLASMALAB" charge feeding system, special designed for FFP-plasma reactor. This feeding system consists of two main parts—a sealed hopper with mechanical mixing and feeding, metering screw transporter. The mixing of the hopper and motion of the screw are hydraulic drive. The productivity of the charge feeding system depends on rotational speed of the screw. The technical parameters of the charge feeding system are presented.


Articles with similar content:

TRANSPORT AND HEAT PHENOMENA OF TRANSFERRED DC ARC UNDER AUTO-ELECTRO-MAGNETIC ROTATION (AEMR) IN PLASMALAB REACTOR
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 2
Mihail K. Mihovsky, V. Hadzhiyski
ELECTROMAGNETIC AND GAS DYNAMIC CONTROL OF TRANSFERRED PLASMA ARC IN METALLURGICAL PLASMA REACTORS AND FURNACES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.11, 2007, issue 3
Mihail K. Mihovsky, L. Todorov, V. Hadzhiyski
SPEED DETERMINATION OF AUTO-ELECTRO-MAGNETIC ROTATION (AEMR) OF DC ARC IN "PLASMALAB" FFP-PLASMA REACTOR
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 2
Mihail K. Mihovsky, V. Hadzhiyski
THE METHOD OPTIMIZATION OF GAS TURBINE BLADES COOLING SYSTEM
International Heat Transfer Conference 11, Vol.18, 1998, issue
A. V. Loburev , M. S. Cherny, Boris M. Galitseisky
S. S. KUTATELADZE IN HIS HOMELAND
International Journal of Fluid Mechanics Research, Vol.27, 2000, issue 5-6
D. I. Avaliani