Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN On-line: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2015013827
pages 187-194

EQUIPMENT FOR PULSED THERMAL TREATMENT OF THE SURFACES OF MATERIALS BY A LOW-ENERGY ELECTRON BEAM

Vladimir N. Devyatkov
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia
Nikolay N. Koval
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia; National Research Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia
S. V. Grigoriev
Institute of High-Current Electronics, Siberian Branch, Russian Academy of Sciences, 4 Akademicheskii Ave., Tomsk, 634055, Russia
A. D. Teresov
Institute of High-Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademicheskiy Ave., Tomsk, 634055, Russia; National Research Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia

RESUMO

This paper describes the design of the equipment used for studying the treatment of the surfaces of metal specimens and presents the results of studies of a source that produces a low-energy high-current electron beam. An electron beam with a current of up to 300 A and pulse duration of 20−200 µs is generated in a gas-filled diode with a plasma cathode at a pulse repetition rate of 0.3−15 s−1 and at an accelerating voltage of up to 25 kV. The space-charge-compensated electron beam is transported in a longitudinal magnetic field for a distance of 20−30 cm to the region of its interaction with a solid. At a current density of up to 20 A/cm2, the beam power density proves to be sufficient for melting a metal surface by means of one or several pulses.


Articles with similar content:

SPECTROSCOPIC AND PROBE DIAGNOSTICS OF CARBON PLASMA FLOWS OF A PULSE VACUUM ARC
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 1-2
S.V. Goncharik, V. V. Azharonok, L. E. Krat'ko, N. M. Chekan, N. I. Chubrik, I. P. Smyaglikov
Study of excited atomic states of hydrogen and chemical phenomena on liquid silicon target under a RF inductive thermal plasma torch
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.5, 2001, issue 2
Jacques Amouroux, F. Bourg, F. Krayem, Daniel Morvan
EXPERIMENTAL STUDY OF A PULSE PLASMA FLOW IN A MODE OF DIAMOND-LIKE COATING DEPOSITION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 4
V. G. Tatur, A. I. Zolotovsky, E .I. Tochitsky, I. P. Smyaglikov
A THEORETICAL EVOLUTION ANALYSIS OF THE DIFFERENT ANODE AND CATHODE ELECTRIC ARC MATERIALS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 1
A. Lefort, S. Clain, M. Abbaoui
OBTAINING AND PHYSICOMECHANICAL PROPERTIES OF SUPERHARD NANOCOMPOSITE BASED ON REFRACTORY NITRIDES
Nanoscience and Technology: An International Journal, Vol.10, 2019, issue 4
S. Cygan, V. S. Niss, Vladimir S. Urbanovich, S. V. Grigoriev, L. Jaworska, T. D. Malikina