Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
International Journal for Multiscale Computational Engineering
Fator do impacto: 1.016 FI de cinco anos: 1.194 SJR: 0.452 SNIP: 0.68 CiteScore™: 1.18

ISSN Imprimir: 1543-1649
ISSN On-line: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.2017019518
pages 219-237

MODELING OF THIN COMPOSITE LAMINATES WITH GENERAL ANISOTROPY UNDER HARMONIC VIBRATIONS BY THE ASYMPTOTIC HOMOGENIZATION METHOD

Yu. I. Dimitrienko
Computational Mathematics and Mathematical Physics Department, Bauman Moscow State Technical University, 2-nd Baumanskaya Str., 5, Moscow, 105005, Russia
I.D. Dimitrienko
Computational Mathematics and Mathematical Physics Department, Bauman Moscow State Technical University, 2-nd Baumanskaya Str., 5, Moscow, 105005, Russia

RESUMO

A new approach to the asymptotic homogenization theory for thin composite laminates with general anisotropy of elastic modules under harmonic vibrations is suggested. The main purpose of the theory is to derive a closed explicit equation system for all six stress tensor components in composite laminates under vibrations, using 3D general equations for steady oscillations of elastic solids, by the asymptotic homogenization method. Unlike the classical homogenization analysis of 3D periodicity structures, our approach was applied to thin laminates with a constant thickness, but without any periodicity through the plate thickness. Recurrent chains of local vibration problems were deduced by the homogenization method, and closed-form solutions of these problems were found for thin laminates. This method allows us to compute all six stresses’ distributions in a plate including normal through-thickness and shear interlayer stresses for the case of general anisotropy in elastic modules. Unlike the classical plate theories, for the case of general anisotropy in elastic modules, when there are 21 elastic constants, the displacements’ distribution through a plate thickness is not linear. Longitudinal displacements proved to be linear functions of the coordinate along a plate thickness only for special anisotropy types — for monoclinic materials of plate layers, whose elastic modules’ symmetry plane is parallel to a middle plane of the plate. Computations by the developed method and by a 3D-?nite-element method solving the three-dimensional problem on free vibrations were compared, which showed a high accuracy of the developed method in calculation of natural frequencies and all six stresses in the plate.


Articles with similar content:

THE ASYMPTOTIC THEORY OF THERMOELASTICITY OF MULTILAYER COMPOSITE PLATES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.6, 2015, issue 1
D. O. Yakovlev, Yu. I. Dimitrienko
EFFECTIVE THERMOELASTIC PROPERTIES OF HETEROGENEOUS THERMOPERISTATIC BAR OF RANDOM STRUCTURE
International Journal for Multiscale Computational Engineering, Vol.13, 2015, issue 1
Valeriy A. Buryachenko, Chen Wanji, Yang Shengqi
Asymptotic Homogenization Models for Smart Composite Plates with Rapidly Varying Thickness: Part II—Applications
International Journal for Multiscale Computational Engineering, Vol.2, 2004, issue 1
A. V. Georgiades, A. L. Kalamkarov
FREE AND FORCED VIBRATIONS OF THICK-WALLED LAMINATED ANISOTROPIC CYLINDRICAL SHELLS WITH ACCOUNT FOR ENERGY DISSIPATION AT FREQUENCIES CLOSE TO RESONANCE ONES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.8, 2017, issue 3
Aleksandr V. Marchuk, S.V. Gnedash, D. O. Shandyba
INVESTIGATION OF THE STATICS AND FREE VIBRATIONS OF CYLINDRICAL SHELLS ON THE BASIS OF A NONCLASSICAL THEORY
Composites: Mechanics, Computations, Applications: An International Journal, Vol.6, 2015, issue 2
T. N. Doan, V. V. Firsanov