Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.737 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 30, 2020 Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017019096
pages 569-578

A STUDY ON DISCHARGE COEFFICIENTS OF CLOSED-TYPE SWIRL INJECTORS FOR A LIQUID ROCKET ENGINE

Kyubok Ahn
School of Mechanical Engineering, Chungbuk National University, Chungbuk, Korea
Hwan-Seok Choi
Combustion Chamber Department, Korea Aerospace Research Institute, Daejeon, Korea

RESUMO

An experimental and comparative study on the discharge coefficients of closed-type swirl injectors, which have a swirl chamber diameter larger than the nozzle diameter, has been performed. With a range of geometric dimensions and therefore broad swirl injector geometric constants, 27 closed-type swirl injectors were designed and manufactured. Hydraulic cold-flow tests were conducted using tap water to measure the discharge coefficients, with pressure differentials through the injectors ranging from approximately 8 to 12 bar. The discharge coefficients obtained from the cold-flow tests were confirmed to follow a functional relationship to the swirl injector geometric constant. A novel simple empirical equation, which would be useful in the design of new closed-type swirl injectors for liquid rocket engines, is suggested. The present experimental results were compared with previous empirical equations to investigate their accuracy. It was found that most equations predicted well the measured discharge coefficients only in a narrow range of swirl injector geometric constants; on the contrary, an equation suggested by Russian researchers could anticipate those with great accuracy in a whole range of present swirl injector geometric constants.


Articles with similar content:

AN EXTENSIVE STUDY ON THE DISCHARGE COEFFICIENTS OF OPEN-TYPE SWIRL INJECTORS
Atomization and Sprays, Vol.27, 2017, issue 10
Kyubok Ahn, Hwan-Seok Choi
SPRAY CHARACTERISTICS OF AN OPEN-END SWIRL INJECTOR
Atomization and Sprays, Vol.22, 2012, issue 5
Wei Zhang, Qing-Fei Fu, Kun-Da Cui, Li-Jun Yang
EXPERIMENTAL INVESTIGATION ON THE NATURE OF HEAT TRANSFER OF SEMI-OPEN TWO-PHASE THERMOSYPHON
Energy and Environment, 1995, Vol.0, 1995, issue
Yun Fan , ChuanTong Li , Ning Chen, ZhengChang Song
OPTIMAL AND NONOPTIMAL FLOWS IN A SWIRL ATOMIZER
Atomization and Sprays, Vol.19, 2009, issue 12
S. N. Patel, L. Craig, B. Kanya, Nathaniel Barlow, Sung P. Lin
Two-Phase Slug Flow Pressure Drop in a Tee-Junction
International Journal of Fluid Mechanics Research, Vol.37, 2010, issue 2
H. I. Abu-Mulaweh, A. T. Al-Halhouli, Mahmoud Ahmad Hammad, M. Alhusein, B. Shannak