Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.262 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v13.i23.60
22 pages

DEVELOPMENT AND ASSESSMENT OF A HYBRID DROPLET COLLISION MODEL FOR TWO IMPINGING SPRAYS

Gwon Hyun Ko
School of Mechanical Engineering, Chung-Ang University, Chung-Ang University 221, HeukSuk Dong, DongJak Ku, Seoul, 156-756, Korea
Seong Hyuk Lee
Chung-Ang University
Hong Sun Ryou
School of Mechanical Engineering, Chung-Ang University, Chung-Ang University 221, HeukSuk Dong, DongJak Ku, Seoul, 156-756, Korea
Young Ki Choi
Micro Thermal System Research Center, Department of Mechanical Engineering, Chung-Ang University, 221 HeukSuk-Dong, DongJak-Gu, Seoul, 156-756, KOREA

RESUMO

The present article proposes a new hybrid collision model to analyze the interspray impingement system. The new hybrid collision model proposes a new criterion for the collision threshold and also involves a collision-induced disintegration regime, together with three representative regimes, such as bouncing, separation, and coalescence. In particular, the new collision thresholds are devised to take account of both the preferred directions and the critical distance between the two impinging droplets from literature findings. A cumulative collision number is also introduced to effectively compare the differences between the present model and the original O’Rourke model. The interspray impingement systems are simulated under both low and high pressures of the gas phase, and the predictions are compared with experimental data such as spray shapes, Sauter mean diameter (SMD), and penetration lengths. The present model shows better agreement with experimental data in predicting droplet sizes for the low-gas-pressure case and spray patterns for the high-gas-pressure case than the O’Rourke model does. It is thus thought that the present hybrid model is acceptable in predicting the interspray impingement system effectively.


Articles with similar content:

MODELING KINETIC ENERGY DISSIPATION OF BOUNCING DROPLETS FOR LAGRANGIAN SIMULATION OF IMPINGING SPRAYS UNDER HIGH AMBIENT PRESSURES
Atomization and Sprays, Vol.28, 2018, issue 8
Zhenyu ZHANG, Peng Zhang
MODELING AND SIMULATION OF WATER AND PVP/WATER EVAPORATING SPRAY FLOWS USING THE DIRECT QUADRATURE METHOD OF MOMENTS
Atomization and Sprays, Vol.24, 2014, issue 5
E. Wimmer, Günter Brenn, Eva Gutheil, S. R. Gopireddy, R. M. Humza
A NUMERICAL STUDY FOR THE EFFECT OF DROP BREAKUP ON THE SPRAY CHARACTERISTICS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
K.B. Hong, Hong Sun Ryou, H.C. Yang, Young Ki Choi
INVESTIGATION OF BREAKUP OF TURBULENT CRYOGENIC VARIABLE-DENSITY JETS
Atomization and Sprays, Vol.12, 2002, issue 5&6
J. Telaar, W. Mayer
DIESEL SPRAY IMPINGING ON A FLAT WALL. PART II: VOLUME AND AVERAGE AIR-FUEL RATIO OF AN IMPINGEMENT DIESEL SPRAY
Atomization and Sprays, Vol.12, 2002, issue 5&6
Masataka Arai, Kyungnam Ko