Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.262 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v20.i12.40
pages 1065-1076

EXPERIMENTAL INVESTIGATION OF NEAR NOZZLE SPRAY STRUCTURE AND VELOCITY FOR A GDI HOLLOWCONE SPRAY

D. Martin
Institute of Heat and Mass Transfer, RWTH Aachen University, Eilfschornsteinstr. 18, 52062 Aachen, Germany
M. Cardenas
Institute of Heat and Mass Transfer, RWTH Aachen University, 52062 Aachen, Germany
Philipp Pischke
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany
Reinhold Kneer
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany

RESUMO

Previous experiments and numerical investigations of engine sprays show string-like structures at the exit of outwardly opening nozzles applied in gasoline direct injection (GDI) engines. These structures were further analyzed using visualization techniques and laser correlation velocimetry (LCV). Ambient conditions of 0.1 MPa and 300 K were chosen for all experiments, while injection pressure and injector energizing time were varied to resolve the influence of injection parameters on structure and velocity. Through application of a visualization measurement technique with a far-field microscope the string-like structures and their evolution during the injection period have been identified. In addition the influence of the injection parameters on the shape and location of the strings has been analyzed. After resolving the differences in string structure, the influence of the string structure on the velocity distribution at the nozzle exit was investigated for obtaining a correlation between string structure and spray velocity. Finally, the dependency of spray exit velocity on injection pressure and injection duration was determined. The information about string structure and nozzle exit velocity can be used to deduce different influences on the primary breakup of a hollow cone spray generated by an outwardly opening nozzle.


Articles with similar content:

EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART II: THE INFLUENCE OF NEEDLE LIFT ON DROPLET SIZE DISTRIBUTIONS AND VORTEX FORMATION
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
INVESTIGATIONS ON ATOMIZATION OF A COXIAL H2/LOX JET UNDER HOT FIRE CONDITIONS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
A. Vogel
ANALYSIS OF DIESEL SPRAY ATOMIZATION BY MEANS OF A NEAR-NOZZLE FIELD VISUALIZATION TECHNIQUE
Atomization and Sprays, Vol.21, 2011, issue 9
Jaime Gimeno, Raul Payri, Javier Salvador, J. De la Morena
EXPERIMENTAL INVESTIGATION OF THE CORRELATION BETWEEN NOZZLE FLOW AND SPRAY USING LASER DOPPLER VELOCIMETER, PHASE DOPPLER SYSTEM, HIGH-SPEED PHOTOGRAPHY, AND X-RAY RADIOGRAPHY
Atomization and Sprays, Vol.20, 2010, issue 1
Barbara Heine, Benjamin Balewski, Cameron Tropea
MACROSCOPIC SPRAY CHARACTERISTICS OF A POROUS INJECTOR
Atomization and Sprays, Vol.24, 2014, issue 1
Inchul Lee, Dohun Kim, Jaye Koo