Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.262 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020419
pages 691-706

INFLUENCE OF PIEZO-DRIVEN SYNTHETIC JET ON WATER SPRAY BEHAVIOR

Matteo Chiatto
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy
Luca Marchitto
Istituto Motori-CNR
G. Valentino
IstitutoMotori, CNR, Naples, 80125, Italy
Luigi de Luca
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy

RESUMO

The opportunity of directly managing the spray formation and its characteristics has gained much interest in the last few years, due to the various active flow control methods available nowadays. In this work particle image velocimetry (PIV) has been applied to investigate the effect of a piezo-driven synthetic jet (SJ) on the droplet velocity distribution of a water spray. Tests were carried out under atmospheric conditions within a chamber test rig, equipped with optical accesses, at two injection pressures, namely, 5 and 10 MPa, exploring the variation of the spray flow field caused by the synthetic jet perturbations. The SJ orifice axis has been placed 45 deg tilted with respect to the water spray axis, and the nozzle body has been moved along its own axis for three different positions. PIV measurements have been averaged on 300 trials. For each operation condition, the actual influence region of the SJ has been evaluated through a T-test algorithm. The synthetic jet locally interacts with the spray, remarkably energizing the region downstream of the impact. The effectiveness of the actuator decreases for higher injection pressures and shorter distances between spray nozzle and SJ orifice. The study has been corroborated by a vorticity field analysis, which is able to identify the influence of coherent vortex structures generated by the air jet, in terms of both droplet momentum and droplet spreading variations.


Articles with similar content:

EFFECTS OF CANTED INJECTION ANGLES ON THE SPRAY CHARACTERISTICS OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.20, 2010, issue 9
Jinkwan Song, Min-Ki Kim, Jeongjae Hwang, Youngbin Yoon
INVESTIGATIONS OF COMMON-RAIL FUEL INJECTION TECHNIQUE IN DI-DIESEL-ENGINES
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Franz Mayinger, B. Ofner, S. Eisen
NEAR FIELD VISUALIZATION OF DIESEL SPRAY FOR DIFFERENT NOZZLE INCLINATION ANGLES IN NON-VAPORIZING CONDITIONS
Atomization and Sprays, Vol.27, 2017, issue 3
Alberto Viera, Raul Payri, Pedro Marti-Aldaravi, Gabriela Bracho
SPRAY VISUALIZATION AND HYDRAULIC CHARACTERIZATION OF THE HOLES OF A FIVE-HOLE, VALVE-COVERED-ORIFICE NOZZLE OF AN ELECTRONICALLY CONTROLLED DIESEL INJECTOR
Atomization and Sprays, Vol.6, 1996, issue 3
D. Laforgia, V. Damiani, R. Campanella
EFFECT OF THE LIQUID INJECTION ANGLE ON THE ATOMIZATION OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.24, 2014, issue 1
H. Almeida, J. M. M. Sousa, Mário Costa