Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.262 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2014011350
pages 47-80

ATOMIZATION MODELLING OF LIQUID JETS USING A TWO-SURFACE-DENSITY APPROACH

Bejoy Mandumpala Devassy
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Chawki Habchi
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Eric Daniel
Aix-Marseille Universite, IUSTI, 5 rue E. Fermi 13453 Marseille Cedex 13, France

RESUMO

In internal combustion engines, the liquid fuel injection is an essential step for the air/fuel mixture preparation and the combustion process. Indeed, the structure of the liquid jet coming out from the injector plays a key role in the proper mixing of the fuel with the gas in the combustion chamber. The present work focuses on the liquid jet atomization phenomena under diesel engine conditions. Under these conditions, liquid jet morphology is assumed, including a separate liquid phase (i.e., a liquid core) and a dispersed liquid phase (i.e., a spray). This article describes the developmental stages of a new atomization model, for a high-speed liquid jet, based on an Eulerian-Eulerian two-fluid approach. The atomization phenomena are modelled by defining different surface density equations for the liquid core and the spray droplets. This new model has been coupled with a turbulent and highly compressible two-fluid system of equations. The process of ligament breakup and its subsequent breakup into droplets are handled by acquiring knowledge from the available high-fidelity experiments and numerical simulations. In the dense region of the liquid jet, the atomization is modelled as a dispersion process due to the stretching of the interface, from the liquid side in addition to the gas side. The model results have been compared to a recently published DNS results under typical direct injection diesel engine conditions. In particular, it has been shown that the interface instabilities and the turbulence in the leading tip of the liquid core play a major role in the primary atomization of diesel jets.


Articles with similar content:

A GIBBS ENERGY RELAXATION (GERM) MODEL FOR CAVITATION SIMULATION
Atomization and Sprays, Vol.25, 2015, issue 4
Chawki Habchi
NUMERICAL INVESTIGATION ON THE DISINTEGRATION OF ROUND TURBULENT LIQUID JETS USING LES/VOF TECHNIQUES
Atomization and Sprays, Vol.18, 2008, issue 7
Vedanth Srinivasan, Kozo Saito, Abraham J. Salazar
END OF INJECTION PROCESS IN A SINGLE-HOLE DIESEL INJECTOR
Atomization and Sprays, Vol.28, 2018, issue 1
V. Garaniya, P. A. Brandner, Mohammadmahdi Ghiji, P. Hield, Laurie Goldsworthy
INJECTION, ATOMIZATION AND MIXING OF PROPELLANTS IN LIQUID ROCKET ENGINES USING COXIAL INJECTORS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
G. Krulle, W. Mayer
DIRECT NUMERICAL AND LARGE-EDDY SIMULATION OF PRIMARY ATOMIZATION IN COMPLEX GEOMETRIES
Atomization and Sprays, Vol.23, 2013, issue 11
Peter Brady, Mark Owkes, Olivier Desjardins, Jeremy McCaslin