Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
Atomization and Sprays
Fator do impacto: 1.262 FI de cinco anos: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN On-line: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v20.i10.40
pages 877-886

EFFECT OF CAVITATION IN CIRCULAR NOZZLE AND ELLIPTICAL NOZZLES ON THE SPRAY CHARACTERISTIC

Jung Goo Hong
Department of Mechanical Engineering, Kyungpook National University, 80 Daehak-ro Buk-gu, Daegu, Republic of Korea
Kun Woo Ku
Department of Mechanical Engineering, Kyungpook National University, 80 Daehak-ro Buk-gu, Daegu, Republic of Korea
Sung Ryoul Kim
Department of Mechanical Engineering, Kyungpook National University, Republic of Korea
Choong-Won Lee
Department of Mechanical Engineering, Kyungpook National University,1370 Sankyuk-dong Buk-gu, Daegu, Republic of Korea

RESUMO

The fuel spray characteristic is one of the most important factors to improve combustion performance. Fuel spray characteristics are affected by the internal flow of liquid in the nozzle. Cavitation is a major factor that influences internal flow. In order to investigate the effects of cavitation phenomena in a circular nozzle and elliptical nozzles, all of the test nozzles in this study were made of transparent acrylic for visualization. The cross-sectional areas of all nozzles were approximately the same, based on a 3 mm diameter circular nozzle. The aspect ratios (a/b) of elliptical nozzles were 2 and 3, respectively. The internal flow in the test nozzle and the external flow were visualized and analyzed by using the images captured from the charge-coupled device (CCD) camera to investigate the effects of cavitation on the liquid jet under various injection pressures. The discharge coefficient tended to decrease with increasing pressure. The cavitation in elliptical nozzles was generated at a lower Reynolds number than the circular nozzle. Elliptical nozzles had a lower discharge coefficient than the circular nozzle at the same Reynolds number. The cavitation length at the major axis plane was longer than that of the minor axis plane in elliptical nozzles. The spray angle was increased with injection pressure. The spray angle in the elliptical nozzles was larger than in the circular nozzles.


Articles with similar content:

EFFECT OF INTERNAL FLOW STRUCTURE IN CIRCULAR AND ELLIPTICAL NOZZLES ON SPRAY CHARACTERISTICS
Atomization and Sprays, Vol.21, 2011, issue 8
Choong-Won Lee, Kun Woo Ku, Jung Goo Hong
Characteristics of the Internal Flow in a Diesel Injection Nozzle
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
Keiya Nishida, Hiroyuki Hiroyasu, J. H. Kim
MORPHOLOGICAL EXPLORATION OF EMERGING JET FLOWS FROM MULTI-HOLE DIESEL INJECTORS AT DIFFERENT NEEDLE LIFTS
Atomization and Sprays, Vol.25, 2015, issue 5
Xusheng Zhang, Jin Wang, Xingbin Xie, Kamel Fezzaa, Fengkun Wang, Jian Gao, Eric M. Dufresne, Seoksu Moon, Ming Chia Lai
EFFECT OF ATOMIZER INTERNAL GEOMETRY ON THE INTERNAL AND EXTERNAL TWO-PHASE FLOW IN EFFERVESCENT ATOMIZATION
Atomization and Sprays, Vol.27, 2017, issue 2
Aly H. Gadallah, Kamran Siddiqui, Mona Hassanzadeh Jobehdar, Wajid A. Chishty
COMPUTATIONAL ANALYSIS OF FLOW PATTERNS IN ELLIPTICAL DIESEL NOZZLES AT HIGH INJECTION PRESSURES
Atomization and Sprays, Vol.28, 2018, issue 11
Bifeng Yin, Bin Xu, Shenghao Yu, Ze Ye, Huaping Xu, Hekun Jia, Weixin Deng