RT Journal Article ID 1cf0b0b76d175847 A1 Nayak, Bibhuti Bhusan A1 Chatterjee, Dipankar A1 Mullick, Amar Nath T1 NUMERICAL SIMULATION OF CONVECTIVE TRANSPORT OF FLY ASH-WATER SLURRY IN HORIZONTAL PIPE BENDS JF Multiphase Science and Technology JO MST YR 2015 FD 2016-06-08 VO 27 IS 2-4 SP 159 OP 186 K1 slurry transport K1 heat transfer K1 numerical simulation K1 Eulerian model K1 pipe bends K1 secondary flow AB A 3D numerical study is conducted to analyze the thermo-fluidic transport associated with the flow of water–fly ash slurry in 90 deg curved horizontal pipes having different radius ratios (ratio between radius of curvature and radius of pipe) of 2.98 and 5.6. The above phenomena in bends is also compared with straight pipe of the same length and diameter for the flow of spherical fly ash particle of sizes 13 and 34 μm at velocities ranging between 1 and 5 m/s and particle concentrations within 10−50% by volume for each velocity. The simulation is carried out by deploying a Eulerian multiphase model available in the commercial computational fluid dynamics code Ansys Fluent. The pipe wall is kept at an isothermal condition of 400 K, whereas the slurry enters the pipeline at a temperature of 300 K. The results indicate that the pipes having bends enhance the heat transfer performance at the expense of the increased pressure drop compared to the straight pipes and also the pressure drop and heat transfer increase with decreasing radius of curvature due to the increase of the secondary flow in the pipe bends. It is also observed that the pressure drop is always greater when the slurry contains larger size particles. On the contrary, the heat transfer coefficient of the slurry having a smaller size of particles is found more in comparison to the larger-size particle slurry. PB Begell House LK https://www.dl.begellhouse.com/journals/5af8c23d50e0a883,17ea0479488c6b6a,1cf0b0b76d175847.html