Inscrição na biblioteca: Guest
Início - ICHMT DL Ano atual Arquivos Comitê executivo Centro Internacional para Transferência de Calor e Massa


DOI: 10.1615/ICHMT.2014.IntSympConvHeatMassTransf.130
pages 189-203

Laboratoire d'Etude des Systèmes Energétiques Industriels LESEI Département de mécanique, Faculté de technologie Université BATNA 2, ALGÉRIE

Mourad Rebay
University of Reims Champagne-Ardenne GRESPI / Faculte des Sciences PB 1039, 51687 Reims, France

Nadim El Wakil
Laboratoire de Thermomécanique - UTAP Moulin de la housse, Faculté des Sciences, Université de Reims Champagne Ardenne, B.P. 1039, 51687 Reims cedex 2, France

Anis Hamza
Synchrotron SOLEIL, L'orme des merisiers, 91192 Gif sur Yvette, France; GRESPI, University of Reims, BP 1039, 51687 REIMS, France

Samir Rahal
Laboratoire LESEI - Département de mécanique Faculté des Sciences de l'Ingénieur, Université de Batna, Algérie


In this paper, three dimensional two phase flow with vaporization has been numerically studied in a mini-channel heat sink. The modeling of the two phase flow was achieved using the Volume of fluid method. The geometric reconstruction scheme, that is based on the piecewise linear interface calculation method was applied to reconstruct the liquid-vapor interface. For an accurate modeling, the effect of axial conduction has been also taken into account, using a conjugate heat transfer model. The vaporization was modeled by developing a numerical code for which appropriate source terms have been added in the momentum and energy equations to take into account heat absorption during vaporization or heat release during condensation. The developed numerical procedure has been validated by the comparison of the obtained results for vaporization inside a cylindrical tube with the correlation given in the literature. A good agreement has been reached between the heat transfer coefficient calculated and that obtained by the used correlation, especially for higher positions along the tube for which the flow regime is well established and disturbances due to the entrance effects disappear. Some typical results are also displayed and discussed. The obtained results show the evolution of the vapor fraction from the inlet of the heat sink to its outlet where all the liquid becomes a vapor. The obtained results of both vapor fraction and velocity contours showed the benefit of such numerical procedure in representing the phase change in heat sinks.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH