Inscrição na biblioteca: Guest
Início - ICHMT DL Ano atual Arquivos Comitê executivo Centro Internacional para Transferência de Calor e Massa


DOI: 10.1615/ICHMT.2008.CHT.2440
11 pages

Mark Kai Ming Ho
Nuclear Analysis Section, Reactor Operations, Australian Nuclear Science and Technology Organisation, Menai, Australia 2234

Guillaume Bois
Laboratoire de Modélisation et de Développement de Logiciels, CEA Grenoble, France

Dave Wassink
Nuclear Analysis Section, Reactor Operations, Australian Nuclear Science and Technology Organisation, Menai, Australia 2234

Guan Heng Yeoh
School of Mechanical and Manufacturing Engineering University of New South Wales, NSW 2052, Australia; Australian Nuclear Science and Technology Organisation (ANSTO), PMB 1, Menai, NSW 2234, Australia


As part of the safety analysis of thermohydraulic processes at ANSTO, the manufacture of molybdenum isotopes for the purpose of radiotherapy is analysed for sufficient decay heat removal under natural convection conditions. The aim of this investigation is to determine, with the aid of computational fluid dynamics, the maximum temperature of a molybdenum plate ‘target’ after irradiation in the OPAL (Open Pool Australian Light-water) research reactor. The heat transfer modelling was conducted in a finite volume formulation using the commercial CFD code CFX. Due to the ratio of plate length to plate diagonal cross section being very large, a two dimensional (2D) simulation was sufficient to reproduce the characteristic vortical formations observed during controlled experiments. Imperative to the accuracy of the calculation was the use of the Monte Carlo radiation model coupled with the SST k-ω turbulence model to numerically determine the maximum plate surface temperature within 8 Kelvin of the experimental result. Other salient features of the CFD simulations such as heat plume patterns and local velocities along the moly-plate target were also verified.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH