Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Nanoscience and Technology: An International Journal
ESCI SJR: 0.219 SNIP: 0.484 CiteScore™: 0.37

ISSN Печать: 2572-4258
ISSN Онлайн: 2572-4266

Nanoscience and Technology: An International Journal

Ранее издавался как Nanomechanics Science and Technology: An International Journal

DOI: 10.1615/NanoSciTechnolIntJ.v8.i3.30
pages 203-210

Ti−Nb POWDER ALLOYS IN THE ADDITIVE TECHNOLOGIES

Zh. G. Kovalevskaya
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 2/4 Akademicheskii Ave., Tomsk, 634021, Russia; Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
Yu. P. Sharkeev
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 2/4 Akademicheskii Ave., Tomsk, 634055, Russia; National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
M. A. Khimich
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 2/4 Akademicheskii Ave., Tomsk, 634055, Russia; National Research Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia
M. A. Korchagin
Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia; Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of the Russian Academy of Sciences, 18 Kutateladze Str., Novosibirsk, 630128, Russia
V. A. Bataev
Novosibirsk State Technical University, 20 Karl Marx Ave., Novosibirsk, 630073, Russia

Краткое описание

The Ti–Nb powder alloy with mass content of 40% and 45% Nb was obtained from Ti and Nb powder mixture in a planetary ball mill in an argon atmosphere. The structure, grain-size distribution, and phase composition of the powder alloy obtained are determined by the time of mechanical alloying. With increase in the alloying time from 3 to 20 min, the average size of the particles formed increases from 41 to 67 μm and then decreases twice at the 25th min of alloying. The shape of the particles changes from shells to pellets. With increase in the alloying time, the quantity of the total solid solution of Ti and Nb components increases in the alloy. A monophase β-alloy is formed in the powder alloy containing 40 wt.% of Nb at alloying time of 20 min. A monophase β-alloy is formed in the powder alloy with 45 wt.% of Nb at alloying time of 15 min. Composition with the 45 wt.% Nb obtained at 15 min alloying time is recommended for using the powder alloy in the process of selective laser melting. Optimization of the powder alloy grain-size distribution obtained requires the sieving of the powder large fraction.


Articles with similar content:

SELECTIVE LASER MELTING OF the Ti–(40–50) wt.% Nb ALLOY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.21, 2017, issue 2
E. A. Ibragimov, A. I. Dmitriev, I. A. Glukhov, A. A. Saprykin, Yu. P. Sharkeev, Anna G Knyazeva, A. M. Mairambekova, A. Yu. Eroshenko, A. Yu. Nikonov, M. A. Khimich
ELECTROEXPLOSIVE DOPING OF TITANIUM ALLOY BY BORON CARBIDE AND SUBSEQUENT ELECTRON BEAM PROCESSING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 4
V. E. Gromov, Yurii F. Ivanov, E. A. Budovskikh, T. A. Kobzareva, L. P. Bashchenko
MODIFICATION OF Al−20%Si HYPEREUTECTIC ALLOY STRUCTURE BY COMPRESSION PLASMA FLOW TREATMENT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 2-3
Valiantsin M. Astashynski, Nikolai N. Cherenda, S. V. Gusakova, A. M. Kuzmicki, A. P. Laskovnev, Vladimir V. Uglov
FORMATION OF HARD AND WEAR-RESISTANT NIOBIUM CARBIDE COATINGS ON HARD-ALLOY TOOLS BY A VACUUM–ARC METHOD
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.23, 2019, issue 2
Andrej K. Kuleshov, V. M. Anishchik, I. A. Sakovich, D. P. Rusalski, Alexander A. Malashevich, Vladimir V. Uglov, V. A. Firago
EFFECT OF ULTRASOUND PRETREATMENT ON MICROSTRUCTURE AND DRYING CHARACTERISTICS OF FIBROUS POROUS MEDIA
International Heat Transfer Conference 16, Vol.16, 2018, issue
Panpan Li, Juan Shi, Zhenqian Chen