Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Nanoscience and Technology: An International Journal
ESCI SJR: 1.031 SNIP: 1.517 CiteScore™: 0.7

ISSN Печать: 2572-4258
ISSN Онлайн: 2572-4266

Nanoscience and Technology: An International Journal

Ранее издавался как Nanomechanics Science and Technology: An International Journal

DOI: 10.1615/NanomechanicsSciTechnolIntJ.v5.i3.80
pages 239-248

INVESTIGATING THE OPPORTUNITIES FOR DEFINING THE FATIGUE CHARACTERISTICS OF TOOLS WITH A NANOLAYER COATING DURING CUTTING

A. I. Pyanov
National University of Science and Technology "MISiS", Moscow, Russia
V. N. Anikin
National University of Science and Technology "MISiS", 4 Leninskiy Ave., Moscow, 119049, Russian Federation
A. A. Pyanov
National University of Science and Technology "MISiS", Moscow, Russia

Краткое описание

The efficiency of contemporary machine-building manufacture is closely related to ensuring the quality in conditions of intensification and high-level automation of technological processes. The use of numerically controlled machines, automated machine complexes, and flexible production systems increased the process output efficiency significantly due to concentration of operations in the same equipment. However, unstable and, sometimes, low operational characteristics of the cutting tools remain a factor restraining further increase of mechanical processing efficiency. One of the most promising ways to increase tool durability by protecting the contact surfaces (solid solutions and carbides) is the application of the cutting blades with a thin wear-resistant coating deposited layer by layer using ion-plasma methods. In such case, the thickness of the coating deposited in one run by the spray unit makes 20-200 nm. This work investigates hard alloys with such nanolayer nitride and oxide coating.
Such blades with wear-resistant coating should meet strict requirements in the process of their manufacture and operation. One of the conditions for successful application of the blades is a high degree of adhesion between the coating and the substrate. In identical coating conditions, the degree of adhesion is defined by the structural defects on the coating-substrate interface and the residual stress. The residual stress may not only reduce the adhesion, but deteriorate the coating properties, i.e., generate microcracks resulting in the coating chipping and fracture. Thusly, the operation efficiency of tools equipped with blades with wear-resistant coating depends not only on the wear resistance of the coating, but also on the coating-substrate characteristics and the effective stress.
Currently, the cutting properties of blades with a coating are evaluated only by the resistance, whereas methods for determining the fatigue characteristics of the blades with a deposited coating are nonexistent. In this work, we propose such method by testing it on nanolayer coating based on titanium nitride and aluminum oxide. Also, we investigate the modifications in the structure of the processed and worn samples of hard alloy with a coating.

Ключевые слова: fatigue, cutting tool, coating, methods, residual stress

Articles with similar content:

PLASMA TECHNOLOGIES FOR THE RESOURCE ENHANCEMENT OF METAL PRODUCTS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 3
G. A. Filippov, M. V. Illichev, E. Kh. Isakaev
STUDY ON BRAZING RESIDUAL STRESS OF STAINLESS STEEL WITH ALUMINA BY FINITE ELEMENT METHOD
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Xionghui Li, Qiu-Wang Wang, Ting Ma, Min Zeng, Wenxiao Chu
USE OF CATHODIC ARC DEPOSITION FOR IMPARTING SPECIAL PROPERTIES TO THE TEXTILE MATERIAL SURFACE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 1
V. N. Kohnyuk, Igor P. Smyaglikov, A. G. Denizhenko, E. V. Mochaylo
THE INFLUENCE OF PRELIMINARY TREATMENT OF HARD-ALLOY TOOL BY HIGH-INTENSITY PULSED ION BEAMS ON STRUCTURE AND WEAR RESISTANCE OF DIAMOND COATING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 4
Andrej K. Kuleshov, Gennadii E. Remnev, V. V. Chaevski, A. A. Grishkevich, S. A. Linnik, Vladimir V. Uglov
COMPARISON OF THERMO-PHYSICAL PROPERTIES AND THERMAL PERFORMANCE OF MACRO-CRACKED THERMAL BARRIER COATING PROCESSED BY APS WITH EBPVD TBCS
International Heat Transfer Conference 13, Vol.0, 2006, issue
Nalini Uppu, Patrick Mensah