Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v7.i3.40
pages 209-222

NOZZLE EROSION CHARACTERIZATION IN A NON-METALLIZED SOLID-PROPELLANT ROCKET MOTOR SIMULATOR

Brian Evans
Pennsylvania State University, University Park, Pennsylvania 16802, USA
Peter J. Ferrara
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University University Park, PA 16802
Jeffrey D. Moore
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University University Park, PA 16802
Patrick Kutzler
The Pennsylvania State University, University Park, PA 16802
Eric Boyd
The Pennsylvania State University, University Park, PA 16802, USA

Краткое описание

An understanding of the nozzle throat erosion processes and developing methods for mitigation of erosion rate can allow higher operating pressure of rocket motors. To evaluate the individual effects of oxidizing species on the chemical erosion rates of rocket nozzles (e.g., G-90 graphite material), a solid-propellant rocket motor simulator (RMS) was designed and tested. The RMS simulates the mass fractions of the oxidizing product species (like H2O, OH, CO2) and product composition temperature generated from a non-metallized composite propellant, called Propellant S, at the throat region. Test firings of the RMS have been conducted at various chamber pressures up to 6.9 MPa (1,000 psia). This instrumented RMS test setup incorporates the use of a realtime X-ray radiography system for measurement of the instantaneous contour of the rocket nozzle throat region. The instantaneous erosion rates of the G-90 nozzle throat were deduced from the recorded X-ray images. Holding oxidizing species concentrations and gas temperature constant, nozzle erosion rates measured from the RMS were correlated to operating pressure. The correlation shows the strong effect of increased heat transfer rates at higher pressures on increased nozzle erosion rates. To avoid nozzle throat erosion, an optional nozzle boundary-layer control system (NBLCS) was utilized in the RMS and was found to work efficiently for preventing nozzle erosion of G-90 graphite material.

ЛИТЕРАТУРА

  1. Chiaverini, M.J., Sauer, J.A., and Munson, S.M., Laboratory Characterization of Vortex-Cooled Thrust Chambers for Methane/O2 and H2/O2.

  2. Abu-Irshaid, E.M. and Majdalani, J., Hydrodynamic Instability of the Bidirectional Vortex.

  3. Bradley, D., Dixon-Lewis, G., Habik, S.E., and Mushi, E.M.J., The Oxidation of Graphite Powder in Flame Reaction Zones.

  4. Kuo, K.K., Acharya, R., Boyd, E., and Thynell, S.T., Succinic Acid/Poly-Vinyl Acetate Pyrolysis Study for Boundary Layer Control in High-Pressure Graphite Rocket Nozzles.

  5. Chiaverini, M.J., Malecki, M.J., Sauer, J.A., Knuth, W.H., Grammer, D.J., and Majdalani, J., Vortex Thrust Chamber Testing and Analysis for O2-H2 Propulsion Applications.


Articles with similar content:

CHARACTERIZATION OF NOZZLE EROSION BEHAVIOR UNDER ROCKET MOTOR OPERATING CONDITIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 6
Brian Evans, Kenneth K. Kuo, Andrew C. Cortopassi
GRAPHITE ROCKET NOZZLE EROSION RATE REDUCTION BY BOUNDARY-LAYER CONTROL USING ABLATIVE MATERIALS AT HIGH PRESSURES
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 5
Ragini Acharya
HIGH-TEMPERATURE BEHAVIOR OF GRAPHITE UNDER LASER IRRADIATION
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 3
Jonathan T. Essel, Baoqi Zhang, Ragini Acharya, Justin Sabourin, Kenneth K. Kuo, Richard A. Yetter
ESTIMATION OF HEAT TRANSFER VARIATION AT SOLID PROPELLANT ROCKET NOZZLE
ICHMT DIGITAL LIBRARY ONLINE, Vol.8, 1996, issue
Mehmet Ali Ak, Huseyin Vural
EFFECT OF REACTION KINETIC SCHEMES ON GRAPHITE ROCKET NOZZLE EROSION RATES
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 1
Ragini Acharya, Kenneth K. Kuo