Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v5.i1-6.340
pages 316-329

EXPERIMENTAL INVESTIGATION OF EROSIVE BURNING OF COMPOSITE PROPELLANTS UNDER SUPERSONIC CROSSFLOWS

S. Krishnan
Department of Aerospace Engineering Indian Institute of Technology Madras, Chennai-600 036, India
K. K. Rajesh
Department of Aerospace Engineering Indian Institute of Technology Madras, Chennai-600 036, India

Краткое описание

Combustion products from a solid-propellant gas-generator are made to crossflow at transonic- and supersonic-velocities over the burning surface of a two-dimensional propellant-slab with a ramp at the slab-end — a nozzleless mode of operation. By using a high-speed camera, the burning edge of the propellant slab is observed under these crossflow conditions through a window assembly of polymethyl methacrylate. Presented are the erosive burning rates thus obtained for two composite propellants of the same composition but of different zero-crossflow burning rates (5- and 9-mm/s at 5 MPa). The erosive burning characteristics at transonic and supersonic crossflow conditions are mostly similar to those at subsonic crossflow situations.


Articles with similar content:

A NUMERICAL SIMULATION OF A PULSE DETONATION ENGINE WITH HYDROGEN FUELS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Houshang B. Ebrahimi, Charles L. Merkle
INVESTIGATIONS ON ATOMIZATION OF A COXIAL H2/LOX JET UNDER HOT FIRE CONDITIONS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
A. Vogel
INSENSITIVE HIGH ENERGY BOOSTER PROPELLANT SUITABLE FOR HIGH PRESSURE OPERATION
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 4
Alan D. Turner, May Lee Chan
NG PLASTICIZED PE−PCP BINDER-BASED ADVANCED SOLID ROCKET PROPELLANTS: STUDIES ON MECHANICAL PROPERTIES
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Haridwar Singh, Debdas Bhowmik, Shrikant M. Pande, Vaibhav S. Sadavarte
LIQUID OXYGEN VAPORIZATION TECHNIQUES FOR SWIRLING-OXIDIZER-FLOW-TYPE HYBRID ROCKET ENGINES
International Journal of Energetic Materials and Chemical Propulsion, Vol.10, 2011, issue 2
Takashi Sakurai, Ikuno Kumazawa, Saburo Yuasa, Koki Kitagawa, Toshiaki Sakurazawa