Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v5.i1-6.510
pages 478-485

SENSITIVITY PROPERTIES AND BURNING RATE CHARACTERISTICS OF HIGH ENERGY DENSITY MATERIALS AND THE PROPELLANTS CONTAINING THESE MATERIALS

Kazushige Kato
Research & Development Department, Taketoyo-Plant, NOF Corporation, 61-1 Kitakomatsudani Taketoyo-cho, Chita-gun, Aichi-ken 470-2398 Japan
Koh Kobayashi
Research & Development Department, Taketoyo-Plant, NOF Corporation, 61-1 Kitakomatsudani Taketoyo-cho, Chita-gun, Aichi-ken 470-2398 Japan
Shigefumi Miyazaki
Research & Development Center, IHI Aerospace Co., Ltd. 21-1 Matobashinmachi, Kawagoe-city, Saitama, 350-1107, Japan
Shin Matsuura
Research & Development Center, IHI Aerospace Co., Ltd. 21-1 Matobashinmachi, Kawagoe-city, Saitama, 350-1107, Japan

Краткое описание

Recently many kinds of high energy density materials (HEDM) have been developed. Among these materials are glycidyl azide polymer (GAP) as a binder for propellant, and ammonium dinitramide (ADN) and hydrazinium nitroformate (HNF) as oxidizer. Thermal decomposition tests, impact sensitivity tests, and friction sensitivity tests were conducted for GAP, ADN and HNF. The impact sensitivity and the friction sensitivity of HNF are higher than those of ADN. The burning rates of GAP propellents were measured. The burning rates of GAP/Ammonium Perchlorate (AP) propellants are well explained by the Granular Diffusion Flame Theory. As the concentration of AP is increased, the diffusion process becomes slower and chemical reaction process in the gas phase becomes faster. As the particle diameter is decreased, the diffusion process becomes faster. The burning rates of GAP/ADS propellants were also measured.


Articles with similar content:

THE INFLUENCE OF SPHERICAL GRANULAR PROPELLANTS ON THE COMBUSTION PROPERTIES OF HIGH-BURNING-RATE PROPELLANT
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 6
Wei Jiang, Fengsheng Li, Lu-Kui Zhao, Ji-Yuan Liang, Xiaode Guo
SICOMIN-ROT K 3130 S AS A BURNING RATE MODIFIER
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
D. D. Blagojevic, Vladica Bozic
DECOMPOSITION AND PERFORMANCEOFNEW HIGH NITROGEN PROPELLANTS AND EXPLOSIVES
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 2
Steven F. Son, Bryce C. Tappan, David E. Chavez, Michael A. Hiskey, Arif N. Ali
STUDIES ON LOW VULNERABILITY GUN PROPELLANTS BASED ON CONVENTIONAL BINDERS AND ENERGETIC PLASTICIZERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 3
Haridwar Singh, Vruushali Khire
ENHANCED REACTIVITY OF ALUMINUM POWDERS BY CAPPING WITH A MODIFIED GLYCIDYL AZIDE POLYMER
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 6
Ricardo José Pontes Lima, Robert Stowe, Sophie Ringuette, Charles Dubois