Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v5.i1-6.970
pages 949-959

ENERGERIC MATERIALS AS GAS GENERATORS IN EXPLOSIONS SUPPRESSION SYSTEMS

B. Szatan
Warsaw University of Technology, Warsaw, Poland
P. Wolanski
Warsaw University of Technology, Warsaw, Poland
J. Nowaczewski
Military University of Technology, Warsaw, Poland
A. Maranda
Military University of Technology, Warsaw, Poland
J. Paszula
Military University of Technology, Warsaw, Poland

Краткое описание

The aim of the research was development and testing of a super fast explosion suppression systems using different explosive charges for membrane perforation as well as for dispersing suppression material from the steel container into protected volume. Water was used as the suppressing material. Using the developed systems, the dust explosions suppression process was studied in a 1.25 m3 chamber. The obtained results show a good usefulness of worked out solutions in the process of dust explosions suppression.


Articles with similar content:

SUPPRESSION OF DUST EXPLOSIONS BY MEANS OF AN ACTIVE SUPERFAST EXPLOSION-SUPPRESSION SYSTEM OF FIVE LITER VOLUME
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 1
Rudolf Klemens, Michal Kaluzny, Marian Gieras
Evaluation of Oil Film Parameters on the Sea Surface Using Multifrequency Radar Data
Telecommunications and Radio Engineering, Vol.51, 1997, issue 8
A. G. Boyev, G. E. Karvitskii, V. N. Tsymbal, O. Ya. Matveyev
SUPPRESSION OF DUST-AIR MIXTURES EXPLOSIONS BY MEANS OF WATER SPRAY
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 5
Rudolf Klemens, P. Oleszczak
IN SITU FABRICATION OF NixAlx INTERMETALLIC REINFORCEMENT PARTICLES AND OF Al-MATRIX COMPOSITE REINFORCED WITH THOSE PARTICLES
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 3
Aamir Shahzad, M. M. Karashaev, Yu. A. Abuzin
MODELING OF THE MATERIAL FLOW IN FRICTION STIR SPOT WELDING USING SPH APPROACH
Visualization of Mechanical Processes: An International Online Journal, Vol.7, 2017, issue 3
Farzad Baratzadeh, Sachin Patil, Hamid Lankarani