Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v5.i1-6.480
pages 453-463

EFFECTS OF FLUORINE-CONTAINING SPECIES ON THE IGNITION AND COMBUSTION OF BORON PARTICLES: EXPERIMENT AND THEORY

Abdullah Ulas
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802, USA
Carl Gotzmer
NAVSEA-lndian Head Division, USA

Краткое описание

The ignition and combustion of isolated boron particles in fluorine-containing environments were investigated both experimentally and theoretically. Boron particles (l-μm amorphous and 3-μm crystalline) were ignited and burned completely in the post-flame region of a multi-diffusion flat-flame burner, which provided a uniform zone of combustion products of CH4/NF3/O2 mixtures. In fluorinated environments, no clear distinction was observed to define a two-stage combustion process, a characteristic feature of boron oxidation without fluorine. At 1,780 K, boron ignition required a higher oxidizer concentration in non-fluorinated environments than in fluorinated environments. HF was found to increase the total burning times (tb) of boron particles; whereas F significantly reduced tb. A theoretical model was developed for simulating the combustion of an isolated boron particle in fluorine-containing environments. The oxide layer removal process was modeled using a reaction mechanism, which considers vaporization process of B2O3/(BO)n mixture and four global surface reactions of oxide layer with O2, H2O, F, and HF. The major products during the oxide removal process were found to be OBF, FBOH, HBO2, and BO2. The "clean" boron combustion model includes four global surface reactions of O2, H2O, F, and HF with boron. BF3, OBF, HBO2, and B2O2 are the major products during the "clean" boron combustion stage. Predicted tb are in good agreement with the measured data in the current study and other published experimental data in the literature. The calculated results show that both oxide layer removal and "clean" boron burning rates increase significantly in the presence of atomic fluorine.


Articles with similar content:

IGNITION AND COMBUSTION OF BORON PARTICLES
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
S. C. Li, Forman A. Williams
Role of CO2 in the Soot Formation and Reduction Mechanisms in CH4 Flat Flame Doped with Toluene under O2/CO2 Environments
International Heat Transfer Conference 15, Vol.7, 2014, issue
Shunsuke Sugai, Ken Okazaki, Hirotatsu Watanabe
RECENT STUDIES OF THE KINETICS OF SOLID BORON GASIFICATION BY B2O3(g) AND THEIR CHEMICAL PROPULSION IMPLICATIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
Daniel E. Rosner, Alessandro Gomez, Roni Zvuloni
OXIDATION OF BORON IN AIR
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
S. A. Kiro, J. I. Vovchuk, N. D. Kostuchenko
GOLD CATALYSTS FOR H2 PRODUCTION AND PURIFICATION
HYSYDAYS
1st World Congress of Young Scientists on Hydrogen Energy Systems, Vol.0, 2005, issue
Flora Boccuzzi, Maela Manzoli, Anna Chiorino, Floriana Vindigni