Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Transfer Research
Импакт фактор: 0.404 5-летний Импакт фактор: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561

Выпуски:
Том 51, 2020 Том 50, 2019 Том 49, 2018 Том 48, 2017 Том 47, 2016 Том 46, 2015 Том 45, 2014 Том 44, 2013 Том 43, 2012 Том 42, 2011 Том 41, 2010 Том 40, 2009 Том 39, 2008 Том 38, 2007 Том 37, 2006 Том 36, 2005 Том 35, 2004 Том 34, 2003 Том 33, 2002 Том 32, 2001 Том 31, 2000 Том 30, 1999 Том 29, 1998 Том 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018019776
pages 381-397

PHASE TRANSITION OF WATER DROPLETS WITH DIFFERENT STATIC CONTACT ANGLES

Tongxin Zhang
School of Engineering and Computer Science, Baylor University, Waco, TX, 76798, USA
Dennis L. O'Neal
School of Engineering and Computer Science, Baylor University, Waco, TX, 76798, USA

Краткое описание

The freezing process of water droplets was investigated for an uncoated and two coated aluminum surfaces subjected to the action of a forced convective environment. One of the coatings was a silicon-based conformal polymer and the other was a hydrophobic coating. Static contact angles of the droplets ranged from 74.6 deg for the uncoated aluminum to 127.1 deg for the hydrophobic coating. Air velocities ranged from 0.2 to 1.85 m/s, surface temperatures ranged from –5 to –13°C, air temperatures ranged from 4 to 24°C, and air relative humidities were varied from 24 to 54%. Droplet radii ranged from 0.4 to 1.5 mm. A digital high speed microscopy system was used to visually observe and measure the freezing in individual droplets. Empirical correlations for dimensionless freezing time as a function of three nondimensional variables (Am, Re, and Ste) were developed. These correlations could be used to estimate dimensionless freezing time over a wide range of experimental conditions. Droplets on the hydrophobic surface showed the slowest nondimensional freezing times while those on the silicon-based conformal polymer coating and uncoated surfaces were comparable. The data for the silicon-based conformal polymer coating surface were also compared to the data from a prior researcher.


Articles with similar content:

FROST LAYER DENSIFICATION ON HYDROPHILIC AND HYDROPHOBIC SURFACES
First Thermal and Fluids Engineering Summer Conference, Vol.8, 2015, issue
Nicholas L. Truster, Andrew D. Sommers, Andrew C. Napora, Edgar J. Caraballo, Aaron C. Riechman
PREDICTING THE FROST DENSITY ON HYDROPHILIC AND HYDROPHOBIC SURFACES: A NEW SEMI-EMPIRICAL CORRELATION
Second Thermal and Fluids Engineering Conference, Vol.50, 2017, issue
Christian J. L. Hermes, Nicholas L. Truster, Andrew D. Sommers, Andrew C. Napora, Edgar J. Caraballo
RELATIVE BEHAVIOR OF WATER AND ORGANICS IN BOILING
International Heat Transfer Conference 6, Vol.1, 1978, issue
A. Singh, Borivoje B. Mikic, Warren Max Rohsenow
RESIDUAL STRESS MEASUREMENT DURING PLASMA SPRAYING OF ALUMINA OR ZIRCONIA AND COMPARISON WITH A ID MODEL
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.2, 1998, issue 3
A. Haddadi, F. Nardou, Guy Delluc, Pierre Fauchais, A.C. Leger
NUMERICAL SIMULATION OF PILEUP PROCESS IN METAL MICRODROPLET DEPOSITION MANUFACTURE
Journal of Enhanced Heat Transfer, Vol.23, 2016, issue 5
Haihua Wu, Zhengying Wei, Guangxi Zhao, Jun Du, Xin Wang