Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Transfer Research
Импакт фактор: 0.404 5-летний Импакт фактор: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561

Выпуски:
Том 51, 2020 Том 50, 2019 Том 49, 2018 Том 48, 2017 Том 47, 2016 Том 46, 2015 Том 45, 2014 Том 44, 2013 Том 43, 2012 Том 42, 2011 Том 41, 2010 Том 40, 2009 Том 39, 2008 Том 38, 2007 Том 37, 2006 Том 36, 2005 Том 35, 2004 Том 34, 2003 Том 33, 2002 Том 32, 2001 Том 31, 2000 Том 30, 1999 Том 29, 1998 Том 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2015007136
pages 751-763

HEAT TRANSFER CHARACTERISTICS OF THE WICKLESS JACKET-TYPE RADIAL HEAT PIPE

Yonggang Jiao
Department of Energy and Environmental Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China
Guodong Xia
Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China
Suge Huang
Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China

Краткое описание

This paper presents a theoretical investigation of the behavior of the jacket-type radial heat pipe in a transient regime. We used a simple, rapid mathematical model to calculate the unsteady-state startup process of the jacket-type radial heat pipe. We also developed a computer simulation program based on the method that estimates the temperature of the heat pipe as well as the time needed to reach a steady-state condition. This paper presents an analysis of the startup performance of the heat pipe with variation of the input heat power. Experiments were focused on defining the influence of the input heat power on the steady-state heat transfer characteristics of the jacket-type radial heat pipe. The simulation results are in good agreement with experimental data. Other favorable outcomes were: the locations near the orifice have good temperature uniformity in the inner tube; an increasing Reynolds number results in a decreasing Nusselt number on a smooth surface, and the total thermal resistance of the heat pipe decreases with increase in the input heat power and filling ratio.


Articles with similar content:

ENHANCING HEAT PIPE PERFORMANCES USING SELF-REWETTING FLUIDS IN SELENE GROUND EXPERIMENT
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Stefan Van Vaerenbergh, Wassilis Tzevelecos
An Investigation on Operating Limit of an Oscillating Heat Pipe
International Heat Transfer Conference 15, Vol.22, 2014, issue
Hongbin Ma, Chao Chang, Gen Li, Yulong Ji
A Model for Predicting the Steady-state Thermal-hydraulics of the Once-through Power Boilers
ICHMT DIGITAL LIBRARY ONLINE, Vol.19, 1981, issue
Bruno Panella, Mario Malandrone, G. Pedrelli, Giovanni Del Tin
HEAT TRANSFER AND DNB HEAT FLUX IN TRANSIENT BOILING
International Heat Transfer Conference 4, Vol.24, 1970, issue
Hiroshi Kawamura, Fujio Tachibana, Mamoru Akiyama
ANALYSIS OF ENTROPY GENERATION, PUMPING POWER, AND TUBE WALL TEMPERATURE IN AQUEOUS SUSPENSIONS OF ALUMINA PARTICLES
Heat Transfer Research, Vol.43, 2012, issue 4
Ebrahim Shirani, Mohammad Karami, Abdollah Avara