Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Transfer Research
Импакт фактор: 0.404 5-летний Импакт фактор: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561

Выпуски:
Том 51, 2020 Том 50, 2019 Том 49, 2018 Том 48, 2017 Том 47, 2016 Том 46, 2015 Том 45, 2014 Том 44, 2013 Том 43, 2012 Том 42, 2011 Том 41, 2010 Том 40, 2009 Том 39, 2008 Том 38, 2007 Том 37, 2006 Том 36, 2005 Том 35, 2004 Том 34, 2003 Том 33, 2002 Том 32, 2001 Том 31, 2000 Том 30, 1999 Том 29, 1998 Том 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2015007515
pages 735-749

AN INVERSE HEAT CONDUCTION MODEL FOR DETERMINING THE CASTING/CHILL INTERFACIAL HEAT TRANSFER COEFFICIENT

Liqiang Zhang
College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha, 410004, Hunan, P. R. China; State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082
Luoxing Li
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, Hunan, P. R. China

Краткое описание

The interfacial heat transfer coefficient (IHTC) is required for accurate simulation of the casting process. However, it cannot be easily obtained simply by using either experimental or theoretical methods. Using measured temperature data, an inverse method can be used to predict the IHTC. However, the latent heat released during the solidification of a molten metal complicates the associated temperature and IHTC calculations. To overcome this difficulty, an equivalent specific heat method is applied in this study to calculate the IHTC for the casting process. It is found that the identified IHTC varies with time during castings solidification. The IHTC values calculated for an aluminum alloy casting of simple geometry cast on a steel chill vary from 1200 to 3500 W·m−2·K−1. Application of the indentified IHTC in the forward heat conduction model with the same boundary condition allows comparison between numerically calculated and experimentally obtained results for validation of the method. The results show that the numerically calculated temperatures are in good agreement with those measured experimentally. This confirms that the proposed method is a feasible and effective tool for determining the casting-mold IHTC. Additionally, the characteristics of the time−varying IHTC have also been discussed.


Articles with similar content:

IDENTIFICATION OF TRANSIENT INTERNAL HEAT SOURCE USING MODIFIED LEVENBERG−MARQUARDT ALGORITHM
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Shubhankar Chakraborty, P. K. Das
Real Time Solution for Inverse Heat Conduction Problems in a Two- Dimensional Plate with Multiple Heat Fluxes at the Surface
First Thermal and Fluids Engineering Summer Conference, Vol.4, 2015, issue
Hamidreza Najafi, James V. Beck , Keith A Woodbury
NATURAL CONVECTION OF POWER LAW FLUIDS FROM A VERTICAL PLATE WITH UNIFORM SURFACE HEAT FLUX
International Heat Transfer Conference 5, Vol.4, 1974, issue
J. L. S. Chen, A. Boehm
ANALYSIS OF CONDUCTION RESPONSES DURING AN UNDERGROUND COAL GASIFICATION EXPERIMENT
International Heat Transfer Conference 6, Vol.2, 1978, issue
Paul J. Hommert
A NEW NUSSELT/RAYLEIGH NUMBER CORRELATION AND WALL FUNCTIONS FOR TURBULENT RAYLEIGH-BÉNARD CONVECTION
International Heat Transfer Conference 13, Vol.0, 2006, issue
Heinz Herwig, Marc Hölling