Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Transfer Research
Импакт фактор: 0.404 5-летний Импакт фактор: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561

Выпуски:
Том 51, 2020 Том 50, 2019 Том 49, 2018 Том 48, 2017 Том 47, 2016 Том 46, 2015 Том 45, 2014 Том 44, 2013 Том 43, 2012 Том 42, 2011 Том 41, 2010 Том 40, 2009 Том 39, 2008 Том 38, 2007 Том 37, 2006 Том 36, 2005 Том 35, 2004 Том 34, 2003 Том 33, 2002 Том 32, 2001 Том 31, 2000 Том 30, 1999 Том 29, 1998 Том 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v38.i2.30
pages 123-134

Convective Heat Transfer in the Processes of ''Gas-Free Combustion (by an Example of Ti + C System Combustion)

B. S. Seplyarskii
Institute of Structural Macrokinetics and Problems of Material Science, Russian Academy of Sciences, Chernogolovka, Moscow Region, Russian Federation
S. G. Vadchenko
Institute of Structural Macrokinetics and Problems of Material Science, Russian Academy of Sciences, Chernogolovka, Moscow Region, Russian Federation

Краткое описание

This work presents, for the first time, an experimental verification of the hypothesis on the convective-conductive mechanism of combustion wave propagation for fast-burning "gas-free" systems, containing an easily melted reagent. According to this hypothesis, the velocity of movement of the melt, ensuring convective heat transfer, in reality represents the velocity of combustion wave propagation. The main factors affecting the velocity of melt movement were determined. It was found that, despite the opinion existing in the scientific literature, elongation of burning specimens, compressed from a stoichiometric mixture of titanium and soot, occurs beyond the heating area. It was demonstrated, for the first time, that thermal vacuum processing of initial specimens not only leads to an increase of the combustion rate, but also modifies the qualitative character of the dependence of the combustion rate on the density: the combustion rate monotonously increases with density. The experiments showed that for specimens, compressed from a stoichiometric mixture of titanium and soot, the combustion rate increases more than twofold with an increase of the specimen thickness. The range of experimental investigations, made by the authors, confirms the hypothesis about a convective-conductive mechanism of the combustion wave propagation for fast-burning "gas-free" systems, containing an easily melted reagent.


Articles with similar content:

MECHANICAL PROPERTIES OF COMPOSITE PROPELLANTS AND EFFECT OF PROPELLANT STRETCH ON ITS BURN RATE
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 3
Sergey A. Rashkovskiy, Alexander N. Klyuchnikov, Alexander V. Fedorychev, Yuriy M. Milyokhin
NEW ENERGETIC MATERIALS FOR THE PROPULSION OF SPACE VEHICLES AND ROCKETS
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 3
Haridwar Singh, S. P. Tiwari
Nature of an Abnormal Dependence of the Rate of "Gas-Free" System Combustion on the Diameter
Heat Transfer Research, Vol.38, 2007, issue 2
B. S. Seplyarskii
THE COMBUSTION MECHANISM FOR AIR AUGMENTED ROCKET PROPELLANTS CONTAINING ELEMENTAL BORON
International Heat Transfer Conference 3 , Vol.12, 1966, issue
J. M. Murphy
EXPERIMENTAL STUDIES OF ALUMINUM AGGLOMERATION IN SOLID ROCKET MOTORS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
J. Duterque