Выходит 18 номеров в год
ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561
Indexed in
EFFECT OF TURBULENCE MODEL ON THE PERFORMANCE OF AN ScO2 RADIAL TURBINE
Краткое описание
In this study, six turbulence models were investigated to predict the performance and flow structure in a supercritical carbon dioxide (SCO2) radial turbine. The output power of the SCO2 radial turbine was 13 MW. The inlet total temperature and total pressure were 800 K and 15.2 MPa, respectively. Numerical results showed that the turbulence model had a significant effect on the flow structure and performance. The Spalart-Allmaras (S-A) turbulence model induced the highest mass flow rate and the lowest efficiency. On the contrary, the SST-γ-θ turbulence model showed the highest efficiency. The total pressure distribution along the spanwise direction was also sensitive to the turbulence model. However, the total pressure deviation caused by different turbulence models was decreased along the flow direction. The turbulence model had different abilities to predict the separation both at the pressure side and suction side. It was found that the limiting streamline at suction is more sensitive to the turbulence model compared to that at the pressure side. The leakage flow also showed the different characteristics induced by different turbulence models.
-
Ameli, A., Uusitalo, A., Turunen-Saaresti, T., and Backman, J., Numerical Sensitivity Analysis for Supercritical CO2 Radial (c) BSL Turbine Performance and Flow Field, Energy Procedia, vol. 129, pp. 1117-1124, 2017.
-
Bahamonde Noriega, J.S., Design Method for S-CO2 Gas Turbine Power Plants: Integration of Thermodynamic Analysis and Components Design for Advanced Applications, Masters, Tudelft, 2012.
-
Bidkar, R.A., Mann, A., Singh, R., Sevincer, E., Cich, S., Day, M., Kulhanek, C.D., Thatte, A., Peter, A.M., Hofer, D., and Moore, J., Conceptual Designs of 50 MWe and 450 MWe Supercritical CO2 Turbomachinery Trains for Power Generation from Coal. Part 1: Cycle and Turbine, in The 5th Int. Symp.-Supercritical CO 2016, vol. 2, pp. 28-31, 2016.
-
Binotti, M., Astolfi, M., Campanari, S., Manzolini, G., and Silva, P., Preliminary Assessment of SCO2 Cycles for Power Generation in CSP Solar Tower Plants, Appl. Energy, vol. 204, pp. 1007-1017, 2017.
-
Cha, J.E., Lee, T.H., Eoh, J.H., Seong, S.H., Kim, S.O., Kim, D.E., Kim, M.H., Kim, T.W., and Suh, K.Y., Development of a Supercritical CO2 Brayton Energy Conversion System Coupled with a Sodium Cooled Fast Reactor, Nucl. Eng. Technol., vol. 41, no. 8, pp. 1025-1044, 2009.
-
Dostal, V., Hejzlar, P., and Driscoll, M.J., High-Performance Supercritical Carbon Dioxide Cycle for Next-Generation Nuclear Reactors, Nucl. Technol., vol. 154, no. 3, pp. 265-282, 2006.
-
Du, W., Luo, L., Wang, S., and Zhang, X., Effect of the Dimple Location and Rotating Number on the Heat Transfer and Flow Structure in a Pin Finned Channel, Int. J. Heat Mass Transf., vol. 127, pp. 111-129, 2018.
-
Du, W., Luo, L., Wang, S., and Zhang, X., Flow Structure and Heat Transfer Characteristics in a 90-deg Turned Pin Fined Duct with Different Dimple/Protrusion Depths, Appl. Therm. Eng., vol. 146, pp. 826-842, 2019.
-
Han, W., Wang, Y., Feng, Z., Li, H., Yao, M., and Zhang, Y., Study on Flow Characteristics of a Turbulent Boundary Layer and Vortex Structure of High Pressure Guide Vanes in SCO2 Turbines, J. Therm. Sci., vol. 28, p. 571, 2019.
-
Harizi, A., Gahmousse, A., Mahfoudi, E.A., and Mameri, A., Numerical Simulation of Boundary Layer Transition for Turbine Blade Heat Transfer Prediction, Heat Transf. Res., vol. 48, no. 10, pp. 877-891, 2017.
-
Hu, L., Chen, D., Gao, S., and Cao, Y., Thermodynamic and Heat Transfer and Transfer Analyses of the S-CO2 Brayton Cycles as the Heat Transport System of a Nuclear Reactor, Heat Transf. Res., vol. 47, no. 10, pp. 907-925, 2016.
-
Kacludis, A., Lyons, S., Nadav, D., and Zdankiewicz, E., Waste Heat to Power (WH2P) Applications Using a Supercritical CO2-Based Power Cycle, Power-Gen International 2012, 2012, Orlando, FL, December 11-13, 2012.
-
Li, M.J., Zhu, H.H., Guo, J.Q., Wang, K., and Tao, W.Q., The Development Technology and Applications of Supercritical CO2 Power Cycle in Nuclear Energy, Solar Energy and Other Energy Industries, Appl. Therm. Eng., vol. 126, pp. 255-275, 2017.
-
Luo, D., Liu, Y., Sun, X., and Huang, D., The Design and Analysis of Supercritical Carbon Dioxide Centrifugal Turbine, Appl. Therm. Eng., vol. 127, pp. 527-535, 2017.
-
Luo, L., Du, W., Wang, S., Wu, W., and Zhang, X., Multi-Objective Optimization of the Dimple/Protrusion Channel with Pin Fins for Heat Transfer Enhancement, Int. J. Numer. Methods Heat Fluid Flow, vol. 29, no. 2, pp. 790-813, 2019a.
-
Luo, L., Zhao, Z., Kan, X., Qiu, D., Wang, S., and Wang, Z., On the Heat Transfer and Flow Structures Characteristics of Turbine Blade Tip Underside with Dirt Purge Holes at Different Locations by Using Topological Analysis, Trans. ASME, J. Turbomachinery, vol. 141, no. 7, pp. 1-24, 2019b.
-
Lv, G., Yang, J., Shao, W., and Wang, X., Aerodynamic Design Optimization of Radial-Inflow Turbine in Supercritical CO2 Cycles Using a One-Dimensional Model, Energy Convers. Manage., vol. 165, pp. 827-839, 2018.
-
Ma, C., Wu, J., Liu, Z., and Lin, Y., Aerodynamic Design Optimization of a 200 kW-Class Radial Inflow Supercritical Carbon Dioxide Turbine, in Global Propulsion and Power Forum Proc. of Shanghai, GPPS-2017-0109, 2017.
-
Milani, D., Luu, M.T., McNaughton, R., and Abbas, A., Optimizing an Advanced Hybrid of Solar-Assisted Supercritical CO2 Brayton Cycle: A Vital Transition for Low-Carbon Power Generation Industry, Energy Convers. Manage., vol. 148, pp. 1317-1331, 2017.
-
Rodgers, C., Mainline Performance Prediction for Radial Inflow Turbines, Von Karman Inst. for Fluid Dynamics, Small High Pressure Ratio Turbines, Tech. Rep. SEE N 88-14364 06-37, 1987.
-
Spadacini, C., Frassinetti, M., Hinde, A., Penati, S., Quaia, M., Rizzi, D., and Serafino, A., The First Geothermal Organic Radial Outflow Turbines, Proc. World Geothermal Congress 2015, 2015.
-
Wei, Z., Meanline Analysis of Raidal Inflow Turbines at Design and Off-Design Conditions, PhD, Carleton University, 2014.
-
Wright, L.M. and Han, J.C., Heat Transfer Enhancement for Turbine Blade Internal Cooling, J. Enhanced Heat Transf., vol. 21, nos. 2-3, pp. 111-140, 2014.
-
Zhang, H., Zhao, H., Deng, Q., and Feng, Z., Aerothermodynamics Design and Numerical Investigation of Supercritical Carbon Dioxide Turbine, ASME Turbo Expo 2015: Turbine Technical Conf. and Exposition, 2015.
-
Zhang, J., Gomes, P., Zangeneh, M., and Choo, B., Design of a Centrifugal Compressor Stage and a Radial-Inflow Turbine Stage for a Supercritical CO2 Recompression Brayton Cycle by Using 3D Inverse Design Method, ASME Turbo Expo 2017: Turbomachinery Technical Conf. and Exposition, 2017. Zhou, A., Song, J., Li, X., Ren, X., and Gu, C., Aerodynamic Design and Numerical Analysis of a Radial Inflow Turbine for the Supercritical Carbon Dioxide Brayton Cycle, Appl. Therm. Eng., vol. 132, pp. 245-255, 2018.
-
Tong Zhiting, Song Zedong, Zhang Chao, Xing Hao, Sun Yuxuan, One-Dimensional Optimization Design of Supercritical Carbon Dioxide Radial Inflow Turbine and Performance Analysis under Off-Design Conditions, Applied Sciences, 12, 8, 2022. Crossref