Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Transfer Research
Импакт фактор: 0.404 5-летний Импакт фактор: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Печать: 1064-2285
ISSN Онлайн: 2162-6561

Выпуски:
Том 51, 2020 Том 50, 2019 Том 49, 2018 Том 48, 2017 Том 47, 2016 Том 46, 2015 Том 45, 2014 Том 44, 2013 Том 43, 2012 Том 42, 2011 Том 41, 2010 Том 40, 2009 Том 39, 2008 Том 38, 2007 Том 37, 2006 Том 36, 2005 Том 35, 2004 Том 34, 2003 Том 33, 2002 Том 32, 2001 Том 31, 2000 Том 30, 1999 Том 29, 1998 Том 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2017017180
pages 1299-1312

DESIGN OF A COOLING SYSTEM FOR MICROCHIPS WITH HIGH HEAT-FLUX DENSITY USING INTEGRATED MICROCHANNELS

Shufang Wang
College of Mechanical and Electrical Engineering, Beijing Union University, Beijing, 100020 China
Debao Zhou
Department of Mechanical and Industrial Engineering, University of Minnesota, Duluth, MN, 55812 USA
Zhiyong Yang
Astronautics Long March Rocket Technology Limited Company, Beij ing China, 100076

Краткое описание

With the improvement of the integration technology, the heat-flux density in microchips has reached 1 kW/cm2. Traditional cooling methods cannot control the temperature below 393 K as desired. Thus chip cooling has become the bottleneck for further integration. To ensure a normal working condition, this paper proposed to use a microfluid to discharge the internal heat, by making the fluid flow through the integrated microchannels in a chip. To realize this, the present work firstly focused on the design of the microchannels based on a desired model of a microchip. Secondly, to find the optimized size of the microchannels, numerical simulation was performed. It was found that the diameter of the microchannels at 40 mm could keep the chip temperature around 393 K. Further experiments have been performed to verify the numerical results. Both the numerical and experimental results have shown that the highest temperature of a chip can be controlled to as low as 370 K through combining and adjusting the bidirectional flow, entering velocity, and entering temperature. These results proved the feasibility of the chip cooling concept using microchannels.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF GAS THROTTLING IN MICROCHANNELS FOR ELECTRONIC COOLING
International Heat Transfer Conference 16, Vol.10, 2018, issue
Tenghui Liu, Geng Hui, Jianhua Weng, Hang Zhang, Xiaoyu Cui, Tongyun Zhang
Application of an Aerothermal Model for Effusion Cooling Systems and Finite Rate Chemistry in Aero-Engine Combustors
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
T. Aumeier, Thomas Behrendt
INTERNAL RADIATION EFFECTS ON THE THERMAL RESPONSE OF HIGHLY POROUS MATERIALS IN RADIATIVE ENVIRONMENT
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2019, issue
Clemens Suter, Jeremy Mora-Monteros, Sophia Haussener
MULTIPHYSICS SIMULATION OF MICROFLUIDIC REACTOR FOR POLYMERASE CHAIN REACTION
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Barbaros Cetin, Ilbey Karakurt
Turbulent natural convection cooling of electronics using liquid coolant
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Bora Yazici, B. Sumer, O. Kirez