Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Porous Media
Импакт фактор: 1.752 5-летний Импакт фактор: 1.487 SJR: 0.43 SNIP: 0.762 CiteScore™: 2.3

ISSN Печать: 1091-028X
ISSN Онлайн: 1934-0508

Выпуски:
Том 23, 2020 Том 22, 2019 Том 21, 2018 Том 20, 2017 Том 19, 2016 Том 18, 2015 Том 17, 2014 Том 16, 2013 Том 15, 2012 Том 14, 2011 Том 13, 2010 Том 12, 2009 Том 11, 2008 Том 10, 2007 Том 9, 2006 Том 8, 2005 Том 7, 2004 Том 6, 2003 Том 5, 2002 Том 4, 2001 Том 3, 2000 Том 2, 1999 Том 1, 1998

Journal of Porous Media

DOI: 10.1615/JPorMedia.v16.i2.60
pages 155-165

MODELING, SIMULATION, AND CONTROL FOR A CONTINUOUS FLOW POROUS MEDIA BURNER

Luis Henriquez-Vargas
Department of Chemical Engineering, Universidad de Santiago de Chile, 3363 B. O'Higgins, Santiago, Chile
Valeri Bubnovich
Department of Chemical Engineering, Universidad de Santiago de Chile, 3363 B. O'Higgins, Santiago, Chile
Pablo Donoso-Garcia
Department of Chemical Engineering, Universidad de Santiago de Chile, B. O'Higgins 3363, Chile
F. Cubillos
Chemical Engineering Department, Universidad de Santiago de Chile, Postal Box 10233, B. O'Higgins 3363, Chile

Краткое описание

The filtration combustion (FC) system in inert porous matrix is one of the most efficient combustion systems due to its better thermal efficiency and lower pollutant formation. The principal drawback of a uniform FC is its transient condition because the combustion wave can propagate freely along the porous matrix in either the downstream or upstream direction. In the present paper we study the positioning of the combustion front in a uniform FC by using a model predictive control (MPC) scheme. The study was carried out by means of simulations considering as manipulated variables the gas filtration velocity and fuel equivalence ratio of CH4/air gas mixtures. The controlled variable was the flame position along the burner. Confinement schemes for combustion wave position are introduced in two configurations: set-point tracking and periodically reversible operation, which show a powerful control scheme able to permanently operate and optimize homogeneous FC burners.

Ключевые слова: combustion, porous media, predictive control

Articles with similar content:

Experimental Study of a Staged Methane/Air Burner Based on Combustion in a Porous Inert Medium
Journal of Porous Media, Vol.4, 2001, issue 3
O. Pickenacker, Dimosthenis Trimis
INFLUENCE OF VARIABLE AIR DISTRIBUTION ON POLLUTANT EMISSIONS IN A MODEL WALL JET CAN COMBUSTOR
Heat Transfer Research, Vol.49, 2018, issue 17
Hosein Yazdani-Ahmadabadi, Farzad Bazdidi-Tehrani, Mohammad Sadegh Abedinejad
Effects of equivalence ratio on combustion in an oscillating-flow porous burner
International Heat Transfer Conference 12, Vol.26, 2002, issue
W. S. Law, Christopher Y. H. Chao, Yong Huang, Ping Cheng
DESIGN AND FLOW ANALYSIS FOR AN OXYGEN-BLOWN PULVERIZED COAL BURNER
Journal of Flow Visualization and Image Processing, Vol.13, 2006, issue 1
Nobuyuki Iwashima, Noriyuki Kobayashi, Masanobu Hasatani, Haeyang Pak
OPTIMIZING COMBUSTION OPERATION IN HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE USING EXHAUST GAS RECIRCULATION: A STUDY OF VARIATION IN PRODUCT SPECIES AND RELATED PARAMETERS
4th Thermal and Fluids Engineering Conference, Vol.5, 2019, issue
Malav Thakore, Pradip Majumdar