Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Pipe Science and Technology, An International Journal

ISSN Печать: 2151-7975
ISSN Онлайн: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.v5.i1-4.190
pages 193-198

CONDITIONS OF WORKING ABILITY OF PULSATING PUMP OF HEAT ACTION

N. M. Savchenkova
The Moscow Power Engineering Institute (Scientific Research University) The Department Heat and Mass Transfer Process and Devices 111250, Moscow, Krasnokazarmennaya str., 14
V. Ya. Sasin
The Moscow Power Engineering Institute (Scientific Research University) The Department Heat and Mass Transfer Process and Devices 111250, Moscow, Krasnokazarmennaya str., 14

Краткое описание

The paper describes the critical conditions for the functioning of the pump of heat action (PHA). They are determined by the heat flux in the evaporator that provides the equilibrium working condition of the pump at a given vapor pressure. This pressure depends on the hydraulic characteristics of the pump and the external contour and the boundary conditions in the zones of evaporation and condensation. Another condition is due to the cooling rate of the drained condenser-accumulator, which must be enough to exclude the possibility of a limit overheating temperature achievement in drained evaporator.