Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Pipe Science and Technology, An International Journal

ISSN Печать: 2151-7975
ISSN Онлайн: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.2015012498
pages 51-63

ACCURATE TEMPERATURE MEASUREMENTS OF A HEAT PIPE WITH PRESSURE CONTROL: DESIGN DESCRIPTIONS AND TEST RESULTS

Siyuan Chen
China Academy of Aerospace Aerodynamics (CAAA), P.O. Box 7201-16, Beijing, 100074, China
Zhihu Xue
China Academy of Aerospace Aerodynamics (CAAA), P.O. Box 7201-16, Beijing, 100074, China
Daiying Deng
China Academy of Aerospace Aerodynamics (CAAA), P.O. Box 7201-16, Beijing, 100074, China
Wei Qu
China Academy of Aerospace Aerodynamics (CAAA), P.O. Box 7201-16, Beijing, 100074, China

Краткое описание

High temperature measurements and calibration are extremely complicated, requiring new techniques and implements to remove the barriers. Heat pipe as an advanced heat transport device could satisfy this need, and is demonstrated to have good temperature uniformity in its inner chamber. In this paper, a new method for accurate temperature measurement of heat pipes, called as Feedback of Pressure to Temperature (FPT), is presented. To verify the feasibility of the method and reduce the realization difficulties, an experiment of a copper heat pipe with water as a working fluid in an intermediate temperature area is conducted. The detailed design of the experiment is introduced and the test results are discussed. The results show that the gauged pressure in the vapor line and liquid line at a large distance from the heat pipe corresponds to the saturated pressure in the heat pipe and there is a direct relationship of the single-value function between the saturated pressure and temperature in the heat pipe. So if the pressure in the lateral line is desired, the working temperature of the heat pipe will be determined, proving the FPT method to be absolutely practicable.


Articles with similar content:

Development of Scanning Thermal Microscopy for Nano-scale Real Temperature Measurement
International Heat Transfer Conference 12, Vol.2, 2002, issue
Osamu Nakabeppu, Takamitsu Suzuki
Two-phase heat transfer inside minichannels: experimental measurements of the condensation heat transfer coefficient
ICHMT DIGITAL LIBRARY ONLINE, Vol.2, 2004, issue
Luca Doretti, Luisa Rossetto, Claudio Zilio, Giuseppe Censi, Alberto Cavallini, Marko Matkovic, Davide Del Col
DEVELOPMENT OF LOOP HEAT PIPES WITH A DISK-SHAPED EVAPORATOR
International Heat Transfer Conference 16, Vol.13, 2018, issue
Zhichun Liu, Wei Liu, Song He
EVALUATION OF THERMAL PROPERTIES UNDER DYNAMIC CONDITIONS
International Heat Transfer Conference 10, Vol.17, 1994, issue
R. Z. Moreno, O. V. Trevisan
NANOSCALE VIEW OF THE EVAPORATING CONTACT LINE PROFILE OF A SESSILE WATER DROPLET ON A SILICON SURFACE
International Heat Transfer Conference 16, Vol.19, 2018, issue
Qiao Liu, Abbasali Abouei Mehrizi, Hao Wang