Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Pipe Science and Technology, An International Journal

ISSN Печать: 2151-7975
ISSN Онлайн: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.v6.i3-4.30
pages 135-153

MICROREACTORS FOR BIODIESEL SYNTHESIS: DESIGN, FABRICATION, AND CHARACTERIZATION

Carolina Palma Naveira-Cotta
Laboratory of Nano- and Microfluidics and Microsystems, LabMEMS, Mechanical Engineering Department and Nanotechnology Engineering Dept., POLI & COPPE, Universidade Federal do Rio de Janeiro, Cidade Universitária, Cx. Postal 68503, Rio de Janeiro, RJ, CEP 21945-970, Brazil; Mechanical Engineering Department, University College London, UCL, United Kingdom
Christopher P. Tostado
Laboratory of Nano & Microfluidics and Microssitems − LabMEMS Department of Mechanical Engineering-PEM & Department of Nanoengineering-PENT, Federal University of Rio de Janeiro-UFRJ, Rio de Janeiro-RJ, Brazil, CEP: 21941-914, Cx. Postal 68529
Jose Martim Costa, Jr.
Federal Instituto Sertao Pernambucano − Campus Serra Talhada Rua Irineu Magalhaes, 985, AABB CEP: 56912-140
Jeziel S. Nunes
Federal Center of Technological Education-CEFET Mechanical Engineering Coordination Rio de Janeiro, Brazil, CEP 23810.000

Краткое описание

The present work describes microreactors for biodiesel continuous synthesis that have been designed, fabricated, characterized, and aimed at achieving a reproducible microfluidic device to compose a modular portable biodiesel production demonstration unit. A straightforward method is presented for the microfabrication and sealing of the microfluidic device that performs the role of a microreactor for biodiesel synthesis, built on a brass metal base and sealed with either a metal cover or a glass cover for easy microscopic observation of two-phase flow patterns. The microfluidic device contains a Υ-junction squared microchannel architecture with width and depth of 400 µm. Microchannels were engraved using a micromilling technique and sealed either by welding, with tin as an additional material, in the case of the all metal device, or by using an epoxy glue, which served as an adhesive to seal a metal−glass device. The quality of the metal-on-metal seal was examined using microscopic analysis of multiple cross sections of the device, whereas the quality of the metal-on-glass seal was analyzed via direct visual inspection of flows within the device using an optical microscope to verify the existence or absence of leaks. An experimental setup was then built to carry out biodiesel synthesis in the metal−metal microreactor, using soybean oil of food grade, absolute ethanol, and sodium hydroxide, NaOH, as a catalyst for the reaction. For a molar ratio ethanol/oil 20:1, a quantity of NaOH catalyst of 1.0 wt.% at a controlled temperature of 47.5°C, it was possible to achieve a yield of fatty acids ethyl esters of 87.2% with 98% of triglyceride converted, for a residence time of 10 min. The experimental analysis confirms the applicability potential of the designed microreactor in the synthesis proposed.


Articles with similar content:

Catalytic hydrogenation using supported ionic liquid membranes
Advances in Molten Salts, Vol.0, 1998, issue
Joan Fuller, Tae H. Cho, Richard T. Carlin
Glove Powder’s Carrying Capacity for Latex Protein: Analysis Using the ASTM ELISA Test
Journal of Long-Term Effects of Medical Implants, Vol.13, 2003, issue 1
V. Hickey, Don Beezhold, K. Horton, D. Kostyal, J. Daddona
VIABILITY OF THE LIQUID-LIQUID SEPARATION OF CADMIUM FROM PHOSPHORIC ACID USING ALIQUAT 336 AS EXTRACTANT
ICHMT DIGITAL LIBRARY ONLINE, Vol.5, 1997, issue
Inmaculada Ortiz, A. M. Urtiaga, A. Irabien, S. Zamacona
Long-Term EEG Digital Recorder System
Telecommunications and Radio Engineering, Vol.56, 2001, issue 1
Leonardo Badillo, Luis Igartua, Francisco Javier Gallegos-Funes, Volodymyr Ponomaryov, Ricardo Peralta-Fabi
A LOW COST, FLEXIBLE PULSATING HEAT PIPE TECHNOLOGY
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.5, 2018, issue
Oguzhan Der, Volfango Bertola, Marco Marengo