Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Critical Reviews™ in Biomedical Engineering
SJR: 0.26 SNIP: 0.375 CiteScore™: 1.4

ISSN Печать: 0278-940X
ISSN Онлайн: 1943-619X

Выпуски:
Том 48, 2020 Том 47, 2019 Том 46, 2018 Том 45, 2017 Том 44, 2016 Том 43, 2015 Том 42, 2014 Том 41, 2013 Том 40, 2012 Том 39, 2011 Том 38, 2010 Том 37, 2009 Том 36, 2008 Том 35, 2007 Том 34, 2006 Том 33, 2005 Том 32, 2004 Том 31, 2003 Том 30, 2002 Том 29, 2001 Том 28, 2000 Том 27, 1999 Том 26, 1998 Том 25, 1997 Том 24, 1996 Том 23, 1995

Critical Reviews™ in Biomedical Engineering

DOI: 10.1615/CritRevBiomedEng.v28.i12.220
pages 129-134

Performance of Enlarged Blood Pump Models With Five Different Impellers

Leok Poh Chua
School of Mechanical and Production Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798
Simon C.M. Yu
Nanyang Technological University, Singapore and Singapore Institute of Technology, Singapore. The Hong Kong Polytechnic University, Hong Kong
H. L Leo
School of Mechanical and Production Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798

Краткое описание

In earlier studies, a 5:1 enlarged pump model of the Kyoto-NTN Magnetically Suspended Centrifugal Blood Pump had been constructed and the flow characteristics investigated. Although the results obtained were satisfactory, the medium used was air. A 5:1 enlarged pump model using water as the medium thus was designed and constructed. Five different impeller blade profile designs were used in the present study. By varying (1) the blade profile design: forward, radial, and backward, (2) the number of blades used, and (3) the rotating speed, the flow characteristics of the pump were investigated. It was found that the impeller with the higher number of blades, used in the forward and straight blade profiles, have the best performance.


Articles with similar content:

Measurements of Enlarged Blood Pump Models Using Laser Doppler Anemometer
Critical Reviews™ in Biomedical Engineering, Vol.28, 2000, issue 1&2
H. L Leo, Simon C.M. Yu, Leok Poh Chua
PERFORMANCE OPTIMIZATION OF CENTRIFUGAL PUMP HANDLING VISCOUS OIL BY MODIFICATION OF IMPELLER GEOMETRY
International Journal of Fluid Mechanics Research, Vol.44, 2017, issue 5
Mojtaba Tahani , Amir F. Najafi, Majid Najafpour, Sepehr Govara
DESIGN AND ANALYSIS OF A DUCTED CONTRA-ROTATING AXIAL FLOW FAN
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Ali Mohammadi, Masoud Boroomand, Hamzeh Eshraghi
Blade and Vane Leading Edge Fillet on Endwall Cooling in Linear Turbine Cascades
International Heat Transfer Conference 15, Vol.20, 2014, issue
Sumanta Acharya, Gazi I. Mahmood
NUMERICAL ANALYSIS OF THERMAL PERFORMANCE OF A SWIRL COOLING TUBE WITH DIMPLES AT THE WALL
International Heat Transfer Conference 16, Vol.10, 2018, issue
Bernhard Weigand, Tian Xia, Yuyang Liu, Yu Rao