Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Critical Reviews™ in Biomedical Engineering
SJR: 0.26 SNIP: 0.375 CiteScore™: 1.4

ISSN Печать: 0278-940X
ISSN Онлайн: 1943-619X

Выпуски:
Том 48, 2020 Том 47, 2019 Том 46, 2018 Том 45, 2017 Том 44, 2016 Том 43, 2015 Том 42, 2014 Том 41, 2013 Том 40, 2012 Том 39, 2011 Том 38, 2010 Том 37, 2009 Том 36, 2008 Том 35, 2007 Том 34, 2006 Том 33, 2005 Том 32, 2004 Том 31, 2003 Том 30, 2002 Том 29, 2001 Том 28, 2000 Том 27, 1999 Том 26, 1998 Том 25, 1997 Том 24, 1996 Том 23, 1995

Critical Reviews™ in Biomedical Engineering

DOI: 10.1615/CritRevBiomedEng.v28.i12.230
pages 135-140

Measurements of Enlarged Blood Pump Models Using Laser Doppler Anemometer

Leok Poh Chua
School of Mechanical and Production Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798
Simon C.M. Yu
Nanyang Technological University, Singapore and Singapore Institute of Technology, Singapore. The Hong Kong Polytechnic University, Hong Kong
H. L Leo
School of Mechanical and Production Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798

Краткое описание

In an earlier study (Chua et al., 1998, 1999a), a 5:1 enlarged model of the Kyoto-NTN Magnetically Suspended Centrifugal Blood Pump (Akamatsu et al., 1995) with five different impeller blade profiles was designed and constructed. Their respective flow characteristics with respect to (1) the three different blade profile designs: forward, radial, and backward, (2) the number of blades used, and (3) the rotating speed were investigated. Among the five impeller designs, the results obtained suggested that impellers A and С designs should be adopted if higher head is required. Impellers A and С therefore were selected for the flow in between their blades to be measured using Laser Doppler Anemometer (LDA), so as to have a better understanding of the flow physics with respect to the design parameters.


Articles with similar content:

Performance of Enlarged Blood Pump Models With Five Different Impellers
Critical Reviews™ in Biomedical Engineering, Vol.28, 2000, issue 1&2
H. L Leo, Simon C.M. Yu, Leok Poh Chua
EFFECTS OF MERIDIONAL SHAPE ON HYDRAULIC AND SUCTION PERFORMANCE OF A HIGH SPECIFIC SPEED CENTRIFUGAL PUMP
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.6, 2018, issue
Hyeon-Seok Shim, Kwang-Yong Kim
COMPACT FRACTAL WEARABLE ANTENNA FOR WIRELESS BODY AREA COMMUNICATIONS
Telecommunications and Radio Engineering, Vol.79, 2020, issue 1
J. Jayalakshmi, S. Ramesh
Accretion of the Efficiency of a Forward-Curved Centrifugal Fan by Modification of the Rotor Geometry: Computational and Experimental Study
International Journal of Fluid Mechanics Research, Vol.40, 2013, issue 6
Sina Samarbakhsh, Nader Montazerin, Javad Alinejad
GAS EJECTORS WITH TANGENTIAL BLOWING INTO THE MIXING CHAMBER
TsAGI Science Journal, Vol.41, 2010, issue 3
N. A. Shushin