Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Enhanced Heat Transfer
Импакт фактор: 0.562 5-летний Импакт фактор: 0.605 SJR: 0.175 SNIP: 0.361 CiteScore™: 0.33

ISSN Печать: 1065-5131
ISSN Онлайн: 1026-5511

Выпуски:
Том 27, 2020 Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v3.i4.30
pages 273-280

Heat Transfer and Skin Friction Comparison of Dimpled Versus Protrusion Roughness

Mark E. Kithcart
Mechanical Engineering Department North Carolina A&T State University Greensboro, NC 27411
David E. Klett
Mechanical Engineering Department North Carolina A&T State University Greensboro, NC 27411

Краткое описание

This paper presents results of skin friction and heat transfer measurements made on flat plates with closely-spaced, three-dimensional surface roughness elements (hemispherical dimples, hemispherical protrusions, and rectangular protrusions) in turbulent boundary-layer flow at velocities ranging from 18 to 40 m/s (roughness Reynold's nos. from 1500 to 4000). The roughness element densities for each plate were chosen using Simpson's sand-grain roughness correlation to study the effects of spacing on drag and heat transfer in the vicinity of the peak of the Simpson-Dvorak correlation curve. The data is presented in terms of the efficiency factor, n = (Str/Sts/(Cfr/Cfs), to provide a means of comparing the effects on skin friction and heat transfer collectively. Dimpled surfaces have the advantage of significantly increasing heat transfer at a lower penalty in increased drag compared to the protrusion roughness studied.