Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Enhanced Heat Transfer
Импакт фактор: 0.562 5-летний Импакт фактор: 0.605 SJR: 0.175 SNIP: 0.361 CiteScore™: 0.33

ISSN Печать: 1065-5131
ISSN Онлайн: 1026-5511

Выпуски:
Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2013006564
pages 43-58

AIRSIDE PERFORMANCE OF FIN-AND-TUBE HEAT EXCHANGERS HAVING SINE WAVE OR SINE WAVE-SLIT FINS

Nae-Hyun Kim
Department of Mechanical Engineering, Incheon National University, 12-1 Songdo-Dong, Yeonsu-Gu Inchon, 22012, Korea
Baek Youn
Air Conditioner and Refrigerator Division, Samsung Electronics Co., Suwon, Korea

Краткое описание

The heat transfer and friction characteristics of heat exchangers having sine wave or sine wave-slit fins were experimentally investigated. Thirty-eight samples having different waffle heights (1.5 and 2.0 mm), fin pitches (1.3 to 1.7 mm), and tube rows (one to three) were tested. Results show that the sine wave-slit geometry provided 20% higher heat transfer coefficients and 44% higher friction factors than the sine wave geometry. The j/f ratios of the sine wave geometry, however, were higher than those of the sine wave-slit geometry. Within the present geometric variations, the effect of waffle height on the heat transfer coefficient was not prominent. The effect of fin pitch on j and f factor was also negligible for sine wave fin. For sine wave-slit fin, however, both j and f factors increased as fin pitch decreased. New correlations were developed based on the present data.


Articles with similar content:

Air Side Performance of Brazed Aluminum Heat Exchangers
Journal of Enhanced Heat Transfer, Vol.3, 1996, issue 1
Yu-Juei Chang, Chi-Chuan Wang
EXPERIMENTAL STUDY OF PRESSURE DROP AND HEAT TRANSFER CHARACTERISTICS OF Ø 10.07 WAVE AND WAVE-SLIT FIN-TUBE HEAT EXCHANGERS WITH WAVE DEPTH OF 2 mm
International Heat Transfer Conference 11, Vol.16, 1998, issue
Young S. Kim, Yong H. Kil, Kook C. Yoo , Hyun Y. Park, Baek Youn
BRAZED ALUMINUM HEAT EXCHANGERS AND THEIR AIR SIDE PERFORMANCE
Journal of Enhanced Heat Transfer, Vol.24, 2017, issue 1-6
Yu-Juei Chang, Chi-Chuan Wang
Parameter Comparison of Condensation Heat Transfer of R134a Outside Horizontal Low-Finned Tubes
International Heat Transfer Conference 15, Vol.3, 2014, issue
Zhen Zhang, Ya-Ling He, Wentao Ji, Jiadi Du, Xiaowei Fan, Wen-Quan Tao, Ding-cai Zhang
HEAT TRANSFER ENHANCEMENT IN A HEAT EXCHANGER HAVING TWO ROWS OF ROUND TUBES AND SLIT FINS USING VORTEX GENERATORS
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.6, 2018, issue
Juan J. Gonzalez, Alberto. M. Pérez, Ruben Borrajo Perez