Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Enhanced Heat Transfer
Импакт фактор: 1.406 5-летний Импакт фактор: 1.075 SJR: 0.287 SNIP: 0.653 CiteScore™: 1.2

ISSN Печать: 1065-5131
ISSN Онлайн: 1563-5074

Выпуски:
Том 27, 2020 Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2012002747
pages 199-211

HEAT TRANSFER ENHANCEMENT IN MICROCHANNELS USING AN ELASTIC VORTEX GENERATOR

H. Mirzaee
School of Mechanical Engineering, Urmia University of Technology, Band Street, Urmia, Iran
Abdolrahman Dadvand
Department of Mechanical Engineering, Urmia University of Technology, Urmia, Iran
I. Mirzaee
Department of Mechanical Engineering, Urmia University, Naazlou, Urmia, Iran
R. Shabani
Department of Mechanical Engineering, Urmia University, Naazlou, Urmia, Iran

Краткое описание

In this paper a novel heat transfer enhancement mechanism in the microchannel cooling passages with water as coolant is proposed and studied numerically. In this mechanism, an elastic vortex generator placed in the microchannel induces an oscillatory transverse vortex which is responsible for heat transfer enhancement along the channel. A two-dimensional incompressible viscous flow at moderate Reynolds numbers (100−500) in the laminar regime is considered. Due to the presence of the elastic vortex generator, the analysis becomes too complicated since the instantaneous nature of the fluid domain and the deformable elastic boundary requires solving a fluid structure interaction problem. To keep the problem from becoming too complicated, the numerical treatment in this study is two-dimensional. An arbitrary Lagrangian-Eulerian approach along with a structured grid is used to simulate the fluid-structure interaction problem. It may be noted that the fluid-structure interaction phenomenon often occurs as a destructive phenomenon in the engineering systems. However, in the present work it is regarded as a desired outcome. The results are compared with those of the simple channel (i.e., a channel without a vortex generator). For the Reynolds numbers within the tested range, 15−35% increase in the average Nusselt number as well as a 10−70% increase in the friction factor is observed. In addition, it is found that for all the Reynolds numbers tested, the elastic vortex generator gives a higher Colburn/friction factor ratio as compared with the rigid vortex generator.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT ON THE ENDWALL AROUND AN OBSTACLE EMBEDDED WITH A VORTEX GENERATOR PAIR
International Heat Transfer Conference 16, Vol.14, 2018, issue
Lei Wang, Bengt Sunden, Safeer Hussain, Jian Liu
Unconfined Flow and Heat Transfer around a Square Cylinder at Low Reynolds and Hartmann Numbers
International Journal of Fluid Mechanics Research, Vol.40, 2013, issue 1
Kanchan Chatterjee, Dipankar Chatterjee
DYNAMICS OF ELASTO-INERTIAL TURBULENCE IN FLOWS WITH POLYMER ADDITIVES
TSFP DIGITAL LIBRARY ONLINE, Vol.8, 2013, issue
Julio Soria, Yves Dubief, Vincent E. Terrapon
HEAT TRANSFER ENHANCEMENT OF MHD FLOW BY A ROW OF MAGNETIC OBSTACLES
Heat Transfer Research, Vol.46, 2015, issue 12
Hulin Huang, Xidong Zhang
CuO/WATER NANOFLUID FLOW OVER MICROSCALE BACKWARD-FACING STEP AND ANALYSIS OF HEAT TRANSFER PERFORMANCE
Heat Transfer Research, Vol.49, 2018, issue 15
Recep Ekiciler, Kamil Arslan