Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Enhanced Heat Transfer
Импакт фактор: 0.562 5-летний Импакт фактор: 0.605 SJR: 0.211 SNIP: 0.361 CiteScore™: 0.33

ISSN Печать: 1065-5131
ISSN Онлайн: 1026-5511

Выпуски:
Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v8.i1.30
pages 23-40

Transitional Heat Transfer and Turbulent Characteristics of Drag-reducing Flow Through a Contracted Channel

Pei-Wen Li
Department of Mechanical Engineering, Kyoto University Kyoto 606-8501, Japan
Yasuo Kawaguchi
Turbomachinery Research Group, Institute for Energy Utilization, National Institute of Advanced Industrial Science and Technology, 1-2 Namiki, Tsukuba, Ibaraki 305-8564, Japan
Akira Yabe
Mechanical Engineering Laboratory, Ministry of International Trade and Industry, 1-2 Namiki, Tsukuba, Ibaraki 305 Japan

Краткое описание

Accompanying the significant reduction of drag of turbulent flow when a drag-reducing surfactant is used, there is a serious reduction of heat transfer, typically 80%. Since the drag reduction can be terminated by a large wall shear stress, the drag-reducing flow of surfactant solution has a special property of the diameter effect. Based on this, a contracted section was designed in a two-dimensional channel to control the drag-reducing flow of a surfactant solution so as to produce turbulence for heat transfer purposes when it passes through the contracted part at certain Reynolds numbers. The same level of turbulence intensity as that of water flow is approached when the surfactant solution passes through the contracted section at certain Reynolds numbers. The heat transfer coefficient thus achieves 70 to 80 percent of that of water flow in the contracted section. In the non-contracted section the friction drag keeps the low level as drag-reducing flow. It is shown that the termination of the drag-reducing effect of the surfactant solution within a heat exchanger is possible by using the present method. The studied surfactant solution is CTAC/NaSal/Water at the temperature of around 30°C with the concentration ranging from 30 ppm to 60 ppm.


Articles with similar content:

HEAT TRANSFER IN THE WAKE BEHIND A LONGITUDINAL VORTEX GENERATOR IMMERSED IN DRAG-REDUCING CHANNEL FLOWS
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Kazuyoshi Nakabe, Jens F. Eschenbacher, Kenjiro Suzuki, Mizuho Joko
Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries with Surfactants as Drag-Reducers and with Polyvinyl Alcohol as Stabilizers
International Heat Transfer Conference 15, Vol.18, 2014, issue
Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, Takuya Tano
DRAG-REDUCTION AND HEAT TRANSFER CHARACTERISTICS OF A NOVEL ZWITTERIONIC SURFACTANT SOLUTION
International Heat Transfer Conference 13, Vol.0, 2006, issue
Jinjia Wei, Y. Zhang, Jacques L. Zakin, Yasuo Kawaguchi, David J. Hart
Research on Twisted Strip with Asymmetric Oblique Teeth
Journal of Enhanced Heat Transfer, Vol.11, 2004, issue 4
Tianlan Yu, Xiumin Yu, Deqi Peng
FLOW AND HEAT TRANSFER CHARACTERISTICS OF WATER SOLUTION WITH FLOW DRAG REDUCTION ADDITIVE IN CURVED TUBES
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Naoto Haruki, Akihiko Horibe, Hideo Inaba