Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Flow Visualization and Image Processing
SJR: 0.161 SNIP: 0.312 CiteScore™: 0.1

ISSN Печать: 1065-3090
ISSN Онлайн: 1940-4336

Выпуски:
Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1993

Journal of Flow Visualization and Image Processing

DOI: 10.1615/JFlowVisImageProc.2018027862
pages 297-328

EVAPORATION CHARACTERISTICS OF A CONFINED NANOFLUID BRIDGE BETWEEN TWO HEATED PARALLEL PLATES

Tapas Ranjan Mahanta
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Sameer Khandekar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016, India

Краткое описание

This paper focusses on understanding the thermophysics and contact line dynamics of evaporating liquid bridges of pure water and nanofluids (0.1% and 0.5% v/v of CuO nanoparticles of average particle size < 50 nm), confined between two heated parallel glass substrates, maintained at a fixed distance, under near constant temperature boundary conditions (60°C and 80°C, respectively). Externally controlled, thin film indium-tin oxide (ITO) coated heaters were fabricated on the glass substrate to maintain the thermal boundary condition. High-resolution images of the liquid bridges were obtained during the evaporation process and later digitally analyzed to find the temporal evolution of relevant geometrical parameters. Subsequently, different thermal resistances involved were estimated, leading to the overall heat transfer coefficient. The order of magnitude of the interfacial resistance was found negligible as compared to the internal thermal resistance of the liquid bridge. Nanofluids evidently showed enhanced diffusional conductivity, and hence increased overall heat transfer coefficient, with a unique contact line motion, involving stick-slip behavior. Strong pinning effect at the contact line was observed during nanofluid evaporation, as a result of deposition of the particles, due to which the life span of nanofluid liquid bridge was much shorter than that of pure water. The rate of evaporation was dependent on the nanoparticle loading.


Articles with similar content:

ENHANCEMENT OF TWO-PHASE BOILING BY CARBON NANOTUBE FORRESTS
Heat Pipe Science and Technology, An International Journal, Vol.5, 2014, issue 1-4
Philippe Marty, Jean Dijon, Rémi Bertossi, Jean-Antoine Gruss, Nadia Caney, Adeline Fournier
Physicochemical Interaction in Electrode Processing for Energy Storage
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Zhixiao Liu, Partha P Mukherjee, Malcolm Stein IV
BEYOND TANNER'S LAW: ROLE OF CONTACT LINE EVAPORATION ON THE SPREADING OF VISCOUS DROPLET
Interfacial Phenomena and Heat Transfer, Vol.3, 2015, issue 3
David Brutin, Wassim Bou-Zeid
BUBBLE DYNAMICS AND POOL BOILING HEAT TRANSFER FROM TRIANGULAR AND RECTANGULAR GROOVED SURFACES
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Satyajit Malode, Sathyabhama A
EXPERIMENTAL STUDY OF NUCLEATE POOL BOILING IN CASE OF MAKING INTERFERENCE-PLATE APPROACH TO THE HEATING SURFACE
International Heat Transfer Conference 3 , Vol.3, 1966, issue
Sadao Yokoya , Yoshiro Katto