Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Flow Visualization and Image Processing
SJR: 0.11 SNIP: 0.312 CiteScore™: 0.1

ISSN Печать: 1065-3090
ISSN Онлайн: 1940-4336

Выпуски:
Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1993

Journal of Flow Visualization and Image Processing

DOI: 10.1615/JFlowVisImageProc.v7.i2.10
12 pages

INVESTIGATION OF FLOW BEHAVIOR AND HEAT TRANSFER IN TUBE AND SLIT-FIN HEAT EXCHANGERS

Karel Balatka
Tokyo University of Agriculture & Technology, Naka-cho 2-24-16, Koganei-shi, Tokyo 184-8588, Japan
Sadanari Mochizuki
Tokyo University of Agriculture and Technology, 2-24-16, Naka-cho, Koganei-shi, Tokyo 184, JAPAN
Akira Murata
Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan
M. Kohayashi
Sanyo Electric Co., Ltd., 1-1-1, Sakata Oizumi-machi, Ora-gun, Gunma, Japan

Краткое описание

In this study heat transfer and flow visualization experiments were performed on five different tube and fin heat exchangers (four of them with slits) for Re = 100 to 1500. The objective was to investigate the effects of various arrangements of slits and slit enclosure walls on the flow behavior and subsequently the heat transfer. The flow behavior was investigated by means of a dye injection and hydrogen bubble visualization technique. The heat transfer performance evaluation, performed by a single blow technique, revealed that the heat transfer is significantly lower for a certain slit and slit enclosure arrangement. It was shown by flow visualization techniques that the slit and slit wall enclosure arrangement has a significant influence on the flow behavior and consequently the heat transfer. Based on the obtained results, recommendations for the slit enclosure wall design are made.