Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Journal of Flow Visualization and Image Processing
SJR: 0.161 SNIP: 0.312 CiteScore™: 0.1

ISSN Печать: 1065-3090
ISSN Онлайн: 1940-4336

Выпуски:
Том 26, 2019 Том 25, 2018 Том 24, 2017 Том 23, 2016 Том 22, 2015 Том 21, 2014 Том 20, 2013 Том 19, 2012 Том 18, 2011 Том 17, 2010 Том 16, 2009 Том 15, 2008 Том 14, 2007 Том 13, 2006 Том 12, 2005 Том 11, 2004 Том 10, 2003 Том 9, 2002 Том 8, 2001 Том 7, 2000 Том 6, 1999 Том 5, 1998 Том 4, 1997 Том 3, 1996 Том 2, 1995 Том 1, 1993

Journal of Flow Visualization and Image Processing

DOI: 10.1615/JFlowVisImageProc.v8.i1.10
14 pages

EXPERIMENTAL FLOW PATTERNS AND PRESSURE CHARACTERISTICS IN A SINGLE HYDROSTATIC POCKET OF VARIABLE DEPTH

Minel J. Braun
Department of Mechanical Engineering, University of Akron, Akron, OH 44325
C. C. Daniels
Mechanical Engineering Department, University of Akron, Akron, OH 44325-3903
D. P. Peloso
Mechanical Engineering Department, University of Akron, Akron, OH 44325-3903
Robert C. Hendricks
NASA Glenn Research Center, Cleveland, OH 44135

Краткое описание

This article presents the results of an investigation into the flow patterns and pressure profiles that develop in a single pocket of a simulated hydrostatic bearing.The investigation has a dual purpose. The first is to determine the physics of the fluid patterns that develop under certain operating and geometry conditions; the second is to provide experimental information to the numerical practitioner for validation of numerical predictive and design codes.The flow was visualized in a hydrostatic pocket of variable depth.Two cases were considered: the first was that of a deep pocket (aspect ratio = depth/length = 1.0); the second was a shallow pocket with an aspect ratio of 0.25.The other parameters, which varied in the experiment, were shaft angular velocity and pocket feed–jet mass flow.The flow was mapped by means of a long-distance microscope combined with a particle trajectory visualization system; the illumination system was provided by a multikilohertz Nd:YLF pulsed laser. It was found that very different flow structures form, depending on the interplay among the strength of the feeding jet, the angular rotation of the shaft, and the aspect ratio of the pocket. It was also discovered that pressures grow continuously across the circumferential length of the pocket, in the direction of rotation.


Articles with similar content:

THE GENERATING CONDITIONS OF A HIGH-REYNOLDS-NUMBER SWIRLING JET
TSFP DIGITAL LIBRARY ONLINE, Vol.5, 2007, issue
Laurent Jacquin, Denis Sipp, Benjamin Leclaire
PIV STUDY ON WATER SPRAY MIXING IN A CONFINED AIR CROSSFLOW
Interfacial Phenomena and Heat Transfer, Vol.2, 2014, issue 2
Huijuan Sun, Bo-Feng Bai, Haibin Zhang
VISUALIZATION OF MAGNETIC EFFECTS ON SPATIAL DISTRIBUTIONS OF OH RADICALS IN A HYDROGEN FLAME
Journal of Flow Visualization and Image Processing, Vol.8, 2001, issue 1
Tomohiko Furuhata, Norio Arai, Noriaki Hamamura, Eisuke Yamada, Kuniyuki Kitagawa, Daiqing Zhao
VISUALIZATION OF SURFACE TEMPERATURE BY THE LIFETIME-BASED PHOSPHOR THERMOMETRY USING A HIGH-SPEED CAMERA
Journal of Flow Visualization and Image Processing, Vol.17, 2010, issue 2
Koji Okamoto, Keiko Ishii, Satoshi Someya, Kaoru Tominaga, Yanrong Li, Mitsunori Uchida
ATOMIZATION CHARACTERISTICS OF A HIGHSPEED ROTARY-BELL PAINT APPLICATOR
Atomization and Sprays, Vol.2, 1992, issue 2
Arthur H. Lefebvre, Dwight W. Senser, P. L. Corbeels