Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal for Multiscale Computational Engineering
Импакт фактор: 1.016 5-летний Импакт фактор: 1.194 SJR: 0.452 SNIP: 0.68 CiteScore™: 1.18

ISSN Печать: 1543-1649
ISSN Онлайн: 1940-4352

Выпуски:
Том 17, 2019 Том 16, 2018 Том 15, 2017 Том 14, 2016 Том 13, 2015 Том 12, 2014 Том 11, 2013 Том 10, 2012 Том 9, 2011 Том 8, 2010 Том 7, 2009 Том 6, 2008 Том 5, 2007 Том 4, 2006 Том 3, 2005 Том 2, 2004 Том 1, 2003

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v2.i1.60
16 pages

3D Micromechanical Modeling of Particulate Composite Materials with Imperfect Interface

Z. Zhong
Key Laboratory of Solid Mechanics of MEC, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, P. R. China
X. B. Yu
Key Laboratory of Solid Mechanics of MEC, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, P. R. China
S. A. Meguid
Engineering Mechanics and Design Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario, Canada M5S 3G8

Краткое описание

In this article, we study the effective elastic and plastic properties of particle-reinforced composite materials with imperfect interface. The imperfect interface is described by a spring-type model assuming that the traction continuity remains intact, while the displacement experiences a jump proportional to the interfacial traction. Both the tangential and normal displacement discontinuities at the interfaces are considered and the effective elastic moduli are obtained using a generalized version of dilute model, self-consistent model, Mori—Tanaka model, and differential model. A comparison between the effective elastic moduli obtained by these different models is made, and the determination of an effective plastic behavior of particulate composite materials, by means of the Mori—Tanaka model and secant moduli method, is also discussed. Finally, we examine the influence of interfacial compliance on the macroscopic averaged mechanical properties of composite materials.


Articles with similar content:

MODELING THE STRESS−STRAIN BEHAVIOR OF SHUNGITE PARTICLE-FILLED RUBBERS
Nanoscience and Technology: An International Journal, Vol.6, 2015, issue 4
A. V. Babaytsev, Yu. V. Kornev, N. A. Semenov
VARIATIONAL INEQUALITIES FOR HETEROGENEOUS MICROSTRUCTURES BASED ON COUPLE-STRESS THEORY
International Journal for Multiscale Computational Engineering, Vol.16, 2018, issue 2
Sonjoy Das, Gary F. Dargush, Ali R. Hadjesfandiari, Sourish Chakravarty
EFFECTIVE THERMOELASTIC PROPERTIES OF HETEROGENEOUS THERMOPERISTATIC BAR OF RANDOM STRUCTURE
International Journal for Multiscale Computational Engineering, Vol.13, 2015, issue 1
Valeriy A. Buryachenko, Chen Wanji, Yang Shengqi
Creep of a C-S-H Gel: Micromechanical Approach
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 4
Luc Dormieux, Julien Sanahuja
EFFECTS OF RIPPLING DEFORMATION AND MIDPLANE STRETCHING ON NONLINEAR VIBRATION OF EMBEDDED CARBON NANOTUBE
International Journal for Multiscale Computational Engineering, Vol.10, 2012, issue 3
Iman Mehdipour, Ganji Domairry, Amin Barari