Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal for Multiscale Computational Engineering
Импакт фактор: 1.016 5-летний Импакт фактор: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN Печать: 1543-1649
ISSN Онлайн: 1940-4352

Выпуски:
Том 17, 2019 Том 16, 2018 Том 15, 2017 Том 14, 2016 Том 13, 2015 Том 12, 2014 Том 11, 2013 Том 10, 2012 Том 9, 2011 Том 8, 2010 Том 7, 2009 Том 6, 2008 Том 5, 2007 Том 4, 2006 Том 3, 2005 Том 2, 2004 Том 1, 2003

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v9.i3.30
pages 271-303

LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS

Aurelie Jean
MINES ParisTech, Centre de Morphologie Mathématique, Mathématiques et Systémes; and Centre des Matériaux, CNRS UMR, France
Francois Willot
MINES-ParisTech, Centre de Morphologie Mathématique, Mathématiques et Systémes, France
S. Cantournet
MINES ParisTech, Centre des Matériaux, CNRS UMR, France
Samuel Forest
Dominique Jeulin
MINES-ParisTech, Centre de Morphologie Mathématique, Mathématiques et Systémes, France

Краткое описание

A general method, based on a multiscale approach, is proposed to derive the effective elastic shear modulus of a rubber with 14% carbon black fillers from finite element and fast Fourier transform methods. The complex multiscale microstructure of such material was generated numerically from a mathematical model of its morphology that was identified from statistical moments out of transmission electron microscopy images. For finite element computations, the simulated microstructures were meshed from three-dimensional reconstruction of the isosurface using the marching cubes algorithm with special attention to the quality of the topology and the geometry of the mesh. To compute the shear modulus and to determine the representative volume element, homogeneous boundary conditions were prescribed on meshes and combined with a domain decomposition method. Regarding parallel computing, specific difficulties related to the highly heterogeneous microstructures and complex geometry are pointed out. The experimental shear modulus (1.8 MPa) obtained from dynamic mechanical analysis was estimated by the Hashin-Shtrikman lower bound ( 1.4 MPa) and the computations on simulated microstructures ( 2.4 MPa). The shear modulus was determined for two materials with the same volume fraction but different distribution of fillers. The current model of microstructures is capable of estimating the relative effect of the mixing time in processing associated with change in morphology on the elastic behavior. The computations also provide the local fields of stress/strain in the elastomeric matrix.


Articles with similar content:

Three-Dimensional Reconstruction of Statistically Optimal Unit Cells of Multimodal Particulate Composites
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 5
D. Rypl, B. C. Collins, Karel Matous
A NEW MULTISCALE FINITE ELEMENT METHOD FOR MECHANICAL ANALYSIS OF PERIODIC HETEROGENEOUS COSSERAT MATERIALS
International Journal for Multiscale Computational Engineering, Vol.11, 2013, issue 4
Hongwu Zhang, Zhaoqian Xie
A MULTISCALE COMPUTATIONAL METHOD FOR 2D ELASTOPLASTIC DYNAMIC ANALYSIS OF HETEROGENEOUS MATERIALS
International Journal for Multiscale Computational Engineering, Vol.12, 2014, issue 2
Hongwu Zhang, Hui Liu
Computational Homogenization of Nonlinear Hydromechanical Coupling in Poroplasticity
International Journal for Multiscale Computational Engineering, Vol.4, 2006, issue 5-6
Fernando A. Rochinha, Marcio A. Murad, Jesus A. Luizar-Obregon
MULTIFIELD CONTINUUM SIMULATIONS FOR DAMAGED MATERIALS: A BAR WITH VOIDS
International Journal for Multiscale Computational Engineering, Vol.9, 2011, issue 5
Valerio Varano, Patrizia Trovalusci